Hasbi Yaprak

Hasbi Yaprak

Auto-generated profile, based on publicly available information

Hasbi Yaprak

Kastamonu Üniversitesi

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2024 in JOURNAL OF CHARACTERIZATION
Verified
Journal Article
Closed access
RARaghda Shihab Ahmed Alkhateeb
Raghda Shihab Ahmed Alkhateeb
ESENDER SARIFAKIOGLU
ENDER SARIFAKIOGLU
HYHasbi Yaprak
Hasbi Yaprak
Due to the increasing demand for infrastructure associated with rapid population growth, the demand for cement is constantly rising. The increase in cement production raises energy and raw material consumption, leading to environmental degradation, a rise in carbon dioxide and other greenhouse gas emissions. To minimize the environmental impacts caused by cement, industrial wastes such as blast furnace slag (GGBFS), fly ash, bottom ash, etc., agricultural wastes like rice husk ash, and materials like pumice and perlite are used as cement replacement materials in concrete production. In this experimental study, GGBFS was used as a cement replacement material at proportions of 20%, 35%, and 50%, and PP (PP) at proportions of 10% and 15%. Mortar specimens of size 40x40x160 mm were produced, and these specimens were subjected to standard water curing and curing in a curing room (70% humidity, 30 °C temperature) for 3, 7, 28, and 90 days. The compressive and flexural strengths of the hardened mortar specimens were then tested. Furthermore, in the scope of the study, the influence of PP on the internal curing, and thus the mechanical strengths at different ages, was examined as a solution to the curing problem that cementitious composites may face due to decreasing water resources associated with global warming.

24 March 2026 in Bitlis Eren Üniversitesi Fen Bilimleri Dergisi
Verified
Journal Article
Closed access
SMSelçuk MEMİŞ
Selçuk MEMİŞ
HYHasbi Yaprak
Hasbi Yaprak
EKEmre Kıvanç
Emre Kıvanç
In this study, three foam concrete mixtures—each utilizing pumice aggregate and fixed foam/water content (240–50–220 g/dm³) but differing in binder type (PKB-I: CEM II/A-M (S–L); PKB-2: CEM II/A-S; PKB-3: CEM II/A-LL)—were comprehensively examined in terms of their fresh and hardened properties, permeability indicators, and high-temperature behavior. The mixtures were produced with constant mix ratios, and parameters such as density (fresh/hardened), total water absorption, open porosity, ultrasonic pulse velocity (UPV), and compressive strength at 3, 7, and 28 days were determined. For high-temperature evaluation, the specimens were exposed to 200, 400, 600, and 800 °C, and the corresponding mass loss and strength variation (%) were calculated. The results indicated that early-age mechanical development was strongly influenced by binder chemistry, with strength ranking at day 3 following the order PKB-2 > PKB-3 > PKB-I; by day 7, these differences had narrowed, and by day 28, all three systems converged to approximately 10.5–10.8 MPa. Although PKB-2 exhibited the highest unit weight, it also demonstrated the greatest porosity and water absorption. Ultrasonic pulse velocity showed a positive correlation with density and a negative correlation with porosity within the same density range. As temperature increased, mass loss gradually rose, converging at around 18–20% at 800 °C. Limited strength gains were observed between 200 °C and 400 °C due to internal water redistribution and gel relaxation, while all mixtures exhibited significant strength reductions at ≥600 °C; the limestone-based system (PKB-3) showed more pronounced losses associated with CaCO₃ decomposition. Overall, CEM II/A-LL proved suitable for lightweight elements requiring low water absorption, CEM II/A-S for applications prioritizing early-age strength, and CEM II/A-M (S–L) provided a balanced design window between mechanical, transport, and thermal stability.