The magnetoresistance, irreversibility fields, and critical current density were studied for a commercial 2G tape at the two relative orientations of magnetic field and superconductor plane. The critical temperatures of this tape of Tc50 % = 91.5 K and Tc0 = 90 K and the width of superconducting transition of ΔT = 1.5 K were obtained. The widths of the transition from the normal to the superconducting state do not increase at the applied magnetic field up to 90 kOe and do not depend on the orientation of the magnetic field with respect to the tape plane. The irreversibility field values were obtained and successfully fitted as a function of temperature using the formula: \(H_{\text {irr}} =H_{\text {irr0}} \left ({1-\frac {T}{T_{\text {c0}} }} \right )^{n}\). The irreversibility fields show an anisotropy, and at the liquid nitrogen temperature, they reach Hirr = 430 kOe and Hirr = 106 kOe for the parallel and perpendicular directions, respectively. The anisotropy ratio amounts to γ = 4 at 77 K and is small in comparison with other high-temperature superconducting materials. The critical current density of this tape was found to be of the order of 106 A cm−2 at 77 K in the self-magnetic field.
The magnetoresistance and irreversibility fields of commercial bismuth-based 1G tape were studied on the basis of the temperature dependencies of the magnetoresistance at the two relative orientations of magnetic field and superconductor plane. The critical temperatures of this tape are the following: Tc50 % = 110.3 K and Tc0 = 109.9 K, and the width of superconducting transition is ΔT = 0.5 K. The widths of the transition to the superconducting state versus applied magnetic fields were derived for both orientations. The experimental data were fitted using the formula ΔT = CHm + ΔT0. The irreversibility field values were obtained and successfully fitted as a function of temperature. At 77 K, they were found to amount to Hirr = 72.8 kOe and Hirr = 5.5 kOe for the parallel and perpendicular directions, respectively.
The (Bi1−xPb x)2Sr 2Ca 2Cu 3Oy (x = 0.2, 0.4) films were obtained directly on silver substrates by the sedimentation process. The temperature dependencies of the AC susceptibility of the films and bulk materials were measured and analyzed. The critical temperatures of the grains Tcg as well as the Josephson junctions TcJ of these films were obtained from the dispersion part of AC susceptibility and they are Tcg = 106.5 K, TcJ = 100.2, Tcg = 106.1 K, and TcJ = 97 K, respectively. The thickness of these films is of the order of a hundred micrometers. The critical currents were derived from the absorption part of AC susceptibility using the Bean’s critical state model. The temperature dependencies of the critical currents were analyzed using the Ginzburg–Landau strong coupling limit approach.