1 February 2012 in Advanced Materials Research
The paper deals with the investigation of 3D digitizing of small parts specifically by optical 3D scanner GOM ATOS TripleScan. The paper shortly illustrates the general concept of Reverse Engineering, which includes also the 3D scanning. The paper also describes the optical 3D scanner GOM ATOS TripleScan and a three-dimensional model obtaining procedure by means of this scanner. In the main part of the paper the concrete 3D scanning process of chosen individual objects is described (clips, ball nose end mill, screw drill, coin). Their shape and size were specific and distinct, therefore it was possible to test and compare particular digitizing attributes. The problems that occurred during 3D digitizing of individual parts are step by step discussed and solved.
11 September 2013 in Applied Mechanics and Materials
The paper shortly illustrates the general concept of Reverse Engineering, which includesalso the 3D scanning. In the main part of the paper the concrete 3D scanning process of chosen individual objects are described. The problems that occurred during 3D digitizing of individual parts are step by step discussed and solved. The paper deals with 3D scanning of ball nose end mills and screw drill. The article gives a procedure for digitizing and comparing the results of the scanned digital models of the two ball nose end mills and screw drill.
22 November 2017 in MATEC Web of Conferences
The article is focused on research of the influence of the layer thickness in the Fused Deposition Modeling (FDM) additive manufacturing method on shape geometrical and dimensional accuracy of parts. The digital model of the object (upper teeths) was obtained by intraoral 3D scanner 3Shape TRIOS used in dentistry. Based on the 3D (Three Dimensional) scanned digital model, the manufacturing of the upper teeths was realized on the FDM 3D printer Zortrax M200. The parts were manufactured in three different layer thicknesses. The manufactured parts was digitized by optical 3D scanner GOM ATOS Triple Scan. The dimensional and shape accuracy of the parts was evaluated in the software GOM Inspect.
30 November 2018 in IOP Conference Series: Materials Science and Engineering
The paper discusses the use of 3D digitization and additive manufacturing technologies in the field of medicine. The paper focuses on design and manufacture of an orthopedic corset. Described are the methods of designing and manufacturing of orthopedic corsets according to the individual requirements of the patient at present, and a more detailed description of the design and manufacturing process using 3D digitization and additive manufacturing. The paper introduces three variants of corset design and manufacture, with the description of the materials selected for use. The main purpose of the paper is to describe the process of the effective design and manufacture of orthopedic corset using 3D digitization and additive manufacturing technologies.
1 September 2016 in Research Papers Faculty of Materials Science and Technology Slovak University of Technology
The paper investigates the influence of infill (internal structures of components) in the Fused Deposition Modeling (FDM) method on dimensional and geometrical accuracy of components. The components in this case were real models of human mandible, which were obtained by Computed Tomography (CT) mostly used in medical applications. In the production phase, the device used for manufacturing, was a 3D printer Zortrax M200 based on the FDM technology. In the second phase, the mandibles made by the printer, were digitized using optical scanning device of GOM ATOS Triple Scan II. They were subsequently evaluated in the final phase. The practical part of this article describes the procedure of jaw model modification, the production of components using a 3D printer, the procedure of digitization of printed parts by optical scanning device and the procedure of comparison. The outcome of this article is a comparative analysis of individual printed parts, containing tables with mean deviations for individual printed parts, as well as tables for groups of printed parts with the same infill parameter.