27 June 2025 in Advanced Materials
Ultrathin solid‐polymer‐electrolytes (SPEs) are the most promising alternative substituting for the conventional liquid electrolyte to enable high‐energy‐density, safe lithium‐metal‐batteries (LMBs). Nevertheless, developing ultrathin SPEs with both high ionic conductivity, and strong Li dendrite retardant is still a significant challenge. Here a scalable fabrication of high‐performance ultrathin (≈7.8 µm) polycarbonate‐based electrolyte (UPCE) is proposed via electrolyte structural engineering, phase separation‐derived poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVH) porous scaffold, without use of additional liquid additives. The rational electrolyte structural modulation with 1‐fluoro‐4‐(1‐methylethenyl)benzene (FMB) enables a weakened Li+‐polymer interaction due to weak Li+ solvation with fluorine, benzene ring, facilitates the formation of LiF‐rich solid‐electrolyte‐interphase on Li metal surface. As a result, the designed UPCE delivers a high ionic conductivity of 4.8 × 10−4 S cm−1, an ultrahigh critical current density of 11.5 mA cm−2 at 25 °C. The solid‐state Li symmetric cell attains unprecedented ultralong cycling over 6000 h at 0.5 mA cm−2. Furthermore, the Li|LiCoO2 cell cycles stably over 1500 cycles at a high operating voltage of 4.5 V, and the pouch cell can achieve a high energy density of 495 Wh kg−1 excluding the packaging. This work offers a new pathway inspiring efforts to commercialize ultrathin SPEs for high‐energy solid‐state LMBs.
5 October 2023 in ACS Nano
21 February 2024 in Advanced Energy Materials
7 April 2023 in ACS Applied Materials & Interfaces
25 October 2024 in Angewandte Chemie International Edition
Utilization of thin Li metal is the ultimate pathway to achieving practical high‐energy‐density Li metal batteries (LMBs), but its practical implementation has been significantly impeded by formidable challenges of poor thinning processability, severe interphase instability and notorious dendritic Li growth. Here we report a practical thin (10–40 μm) Li/Mo/Li 2 Se with concurrently modulated interphase and mechanical properties, achieved via a scalable mechanical rolling process. The in situ generated Li 2 Se and Mo not only enhance the mechanical strength enabling the scalable fabrication of thin Li metal, but also promote homogeneous Li electrodeposition. Significantly, the Li/Mo/Li 2 Se demonstrates ultrahigh‐rate performance (15 mA cm −2 ) and ultralong‐lifespan cycling sustainability (2700 cycles) with exceptional anti‐pulverization capability. The Li|LiFePO 4 cells show substantially prolonged cyclability over 1200 cycles with an ultralow decay rate of ~0.01 % per cycle. Moreover, the Li|LiNi 0.8 Co 0.1 Mn 0.1 O 2 pouch cells deliver enhanced cycling stability even under the extremely harsh conditions of low negative‐to‐positive‐capacity (N/P) ratio of ~1.2 and lean electrolyte of ~0.95 g Ah −1 , showing an exceptional energy density of 329.2 Wh kg −1 . This work sheds light on facile pathway for scalable production of durable thin Li metal anode toward reliable practicability.
15 January 2024 in Advanced Functional Materials
The practical application of sodium (Na) metal anode has been seriously hindered by the uncontrolled Na dendrite growth and severe volume expansion inducing short battery lifespan and safety concerns. Here, highly sodiophilic and ultrafine ZnS‐modified carbon fibers have been rationally constructed as a scaffold to obviate these drawbacks. The in situ generated Na2S‐reinforced fast ion transport interphase and the effective space confinement synergistically facilitate the fast sodium ion interfacial transfer and the homogeneous and dendrite‐free Na deposition, thus enabling high‐rate and dendrite‐free Na metal anode. The modified Na metal demonstrates ultrahigh rate capability (15 mA cm−2) and ultralong cycling life (5300 cycles). Moreover, the Na|Na3V2(PO4)3 (NVP) cell delivers ultrahigh rate capability (80 C) and extraordinarily ultralong lifespan cycling durability (2980 cycles). The Na|NVP pouch cell also exhibits an extraordinarily ultralong‐term cycle life of over 1070 cycles with an extremely low capacity decay rate of 0.0088% per cycle at 10 C. This work provides a facile and efficient strategy to propel the Na metal anode towards practicability.