In a number of applications, a matching network capable of providing specified impedances at different frequencies is necessary. In this brief, we present a novel technique for switchless multiband impedance matching networks based on multiresonant circuits. To illustrate this, simulation results of dual-band and triband networks are also presented. In addition, a dual-band impedance matching network has been implemented and evaluated. The dual-band impedance matching network presents two specified impedances, one at 433 MHz and the other at 915 MHz with 0.82 and 0.20 dB of insertion losses, respectively.
This work presents a RF tunable impedance matching network. It uses a quarter-wavelength (lambda /4) transmission line loaded by a combination of switches, capacitors and inductors. With MEMS-based switches and inductors, the simulation results show that this circuit is capable of correction load reflection coefficients of up 0.5 to better than 0.3 with insertion loss between 0.74-2.11 dB at 2 GHz.
An oscillator design technique for low-power and low-voltage applications is presented. The circuit is based on the classical common-gate Colpitts oscillator with additional positive feedback provided by an inductive gate degeneration. This technique decreases the required transconductance to startup oscillations, which makes possible to reduce the minimum supply voltage, and hence the power consumption. A prototype was designed in a standard 0.13 μm CMOS process using a zero-threshold transistor. The post-layout simulation results show an oscillation frequency of 2.12 GHz, with a power consumption of 4 μW under a 40-mV supply voltage.
A topology of a RF amplifier (1.8 GHz) with an automatic impedance matching system is presented. This RF amplifier, under impedance load mismatch, is capable of reducing the variation of its output power. Simulation results show that, with a load mismatch of up VSWR 5.7:1, the amplifier output power varies between 12.3 and 21 dBm. Incorporating an automatic impedance matching system to the amplifier, a range of output power between 15 and 18.8 dBm is obtained.