21 January 2022 in Nano Letters
15 June 2023 in Advanced Materials
Hygroscopic hydrogels are emerging as scalable and low‐cost sorbents for atmospheric water harvesting, dehumidification, passive cooling, and thermal energy storage. However, devices using these materials still exhibit insufficient performance, partly due to the limited water vapor uptake of the hydrogels. Here, the swelling dynamics of hydrogels in aqueous lithiumchloride solutions, the implications on hydrogel salt loading, and the resulting vapor uptake of the synthesized hydrogel–salt composites are characterized. By tuning the salt concentration of the swelling solutions and the cross‐linking properties of the gels, hygroscopic hydrogels with extremely high salt loadings are synthesized, which enable unprecedented water uptakes of 1.79 and 3.86 gg−1 at relative humidity (RH) of 30% and 70%, respectively. At 30% RH, this exceeds previously reported water uptakes of metal–organic frameworks by over 100% and of hydrogels by 15%, bringing the uptake within 93% of the fundamental limit of hygroscopic salts while avoiding leakage problems common in salt solutions. By modeling the salt‐vapor equilibria, the maximum leakage‐free RH is elucidated as a function of hydrogel uptake and swelling ratio. These insights guide the design of hydrogels with exceptional hygroscopicity that enable sorption‐based devices to tackle water scarcity and the global energy crisis.
12 July 2022 in Advanced Materials
Boiling is an effective energy‐transfer process with substantial utility in energy applications. Boiling performance is described mainly by the heat‐transfer coefficient (HTC) and critical heat flux (CHF). Recent efforts for the simultaneous enhancement of HTC and CHF have been limited by an intrinsic trade‐off between them—HTC enhancement requires high nucleation‐site density, which can increase bubble coalescence resulting in limited CHF enhancement. In this work, this trade‐off is overcome by designing three‐tier hierarchical structures. The bubble coalescence is minimized to enhance the CHF by defining nucleation sites with microcavities interspersed within hemi‐wicking structures. Meanwhile, the reduced nucleation‐site density is compensated for by incorporating nanostructures that promote evaporation for HTC enhancement. The hierarchical structures demonstrate the simultaneous enhancement of HTC and CHF up to 389% and 138%, respectively, compared to a smooth surface. This extreme boiling performance can lead to significant energy savings in a variety of boiling applications.
5 October 2020 in Journal of Applied Physics
Evaporation plays a critical role in a range of technologies that power and sustain our society. Wicks are widely used as passive, capillary-fed evaporators, attracting much interest since these devices are highly efficient, compact, and thermally stable. While wick-based evaporators can be further improved with advanced materials and fabrication techniques, modeling of heat and mass transport at the device level is vital for guiding these innovations. In this perspective, we present the design and optimization of capillary-fed, thin film evaporation devices through a heat and mass transfer lens. This modeling framework can guide future research into materials innovations, fabrication of novel architectures, and systems design/optimization for next generation, high-performance wick-based evaporators. Furthermore, we describe specific challenges and opportunities for the fundamental understanding of evaporation physics. Finally, we apply our modeling framework to the analysis of two important applications—solar vapor generation and electronics cooling devices.
18 June 2022 in International Journal of Heat and Mass Transfer
17 October 2024 in Nature Communications
Moisture-capturing materials can enable potentially game-changing energy-water technologies such as atmospheric water production, heat storage, and passive cooling. Hydrogel composites recently emerged as outstanding moisture-capturing materials due to their low cost, high affinity for humidity, and design versatility. Despite extensive efforts to experimentally explore the large design space of hydrogels for high-performance moisture capture, there is a critical knowledge gap on our understanding behind the moisture-capture properties of these materials. This missing understanding hinders the fast development of novel hydrogels, material performance enhancements, and device-level optimization. In this work, we combine synthesis and characterization of hydrogel-salt composites to develop and validate a theoretical description that bridges this knowledge gap. Starting from a thermodynamic description of hydrogel-salt composites, we develop models that accurately capture experimentally measured moisture uptakes and sorption enthalpies. We also develop mass transport models that precisely reproduce the dynamic absorption and desorption of moisture into hydrogel-salt composites. Altogether, these results demonstrate the main variables that dominate moisture-capturing properties, showing a negligible role of the polymer in the material performance under all considered cases. Our insights guide the synthesis of next-generation humidity-capturing hydrogels and enable their system-level optimization in ways previously unattainable for critical water-energy applications.