24 April 2024 in IEEE Transactions on Power Electronics
DC-series integration introduces a novel approach to seamlessly integrate a solar photovoltaic (PV) array and a battery energy storage (BES) in series. This system, referred to as the PV-integrated battery energy storage system—dc series (PVBESS-DCS), simplifies integration and enhances power density by leveraging the inherent voltage-source characteristics of batteries and adopting the concept of partial power processing. However, addressing voltage variations of a PV array and a BES under different operational conditions remains a challenge to apply the PVBESS-DCS to a regulated dc system, where the dc-bus voltage is fixed. This article proposes a PVBESS-DCS solution tailored for regulated dc systems. Within this framework, we present a controllable series voltage source compensating for the voltage differences between the PV and BES sources and the dc bus. Thus, the system can perform PV maximum power point tracking and curtailment control while charging and discharging BES and connected to a regulated dc bus. Additionally, we present a single-stage multiport partial power processing dc–dc converter designed for the proposed PVBESS-DCS. It utilizes a triple active bridge dc–dc converter topology. This article presents operating principles, control strategies, simulation results, and experimental findings of the proposed PVBESS-DCS for regulated dc systems.
6 June 2024 in IEEE Transactions on Power Electronics
This article addresses the critical issue of real-time monitoring of on -state resistance ( R DSON ) of all power semiconductor devices within a three-phase inverter. An optimized on -state voltage ( V DSON ) measurement circuit and configuration for a multiphase converter architecture is proposed, designed to overcome the challenges posed by different characteristics and nonidealities of current and voltage sensor components. In addition to the hardware, the solution includes a data processing and qualification strategy that minimizes the impact of switching noise and processing circuitry nonidealities on R DSON calculation. The efficacy of the approach is demonstrated through experimental results from a three-phase inverter, which is designed with silicon carbide metal-oxide-semiconductor field-effect transistors. This work contributes a novel solution to the field, enhancing the reliability and efficiency of power semiconductor device monitoring.