5 May 2019 in International Journal of Aerospace Engineering
In the existing vision-based autonomous landing systems for micro aerial vehicles (MAVs) on moving platforms, the limited range of landmark localization, the unknown measurement bias of the moving platform (such as wheel-slip or inaccurate calibration of encoders), and landing trajectory knotting seriously affect system performance. To overcome the above shortcomings, an autonomous landing system using a composite landmark is proposed in this paper. In the proposed system, a notched ring landmark and two-dimensional landmark are combined as an R2D landmark to provide visual localization over a wide range. In addition, the wheel-slip and imprecise calibration of encoders are modeled as the unknown measurement bias of the encoders and estimated online via an extended Kalman filter. The landing trajectory is planned by a solver as a convex quadratic programming problem in each control cycle. Meanwhile, an iterative algorithm for adding equality constraints is proposed and used to verify whether the planned trajectory is feasible or not. The simulation and actual landing experiment results verify the following: the visual localization with the R2D landmark has the advantages of wide localization range and high localization accuracy, the pose estimation result of the moving platform with unknown encoder measurement bias is continuous and accurate, and the proposed landing trajectory planning algorithm provides a continuous trajectory for reliable landing.
9 July 2021 in International Journal of Systems Science
In complex control systems, the channel fading and the measurement censoring are often unavoidable due to sudden environmental changes, intermittent transmission congestions, random failures and repairs of components. To this end, the Tobit Kalman filtering problem for discrete-time systems with the dead-zone-like censoring and channel fading is studied where the censoring and fading phenomena are, respectively, described by the Tobit measurement model and the -order Rice fading channel model. The design of the filter is carried out in two stages: (1) the state augmentation technique is firstly adopted to remove the time-delay effect caused by the fading channel; and (2) the statistical information of censored measurements is used to determine the optimal filter structure in the minimum mean-square error sense, where the orthogonal projection principle is utilised to avoid the deep correlations among the multiple random variables induced by measurement censoring and channel fading. Besides, the desired filter is also devised based on the approach of the conditional expectation. For the convenience of calculation, the filter with the dead-zone-like censoring is converted into an equivalent one with one-side censoring. Finally, a numerical example of estimating the ballistic ball rates is given to verify the effectiveness of the proposed filters.
25 January 2022 in Asian Journal of Control
27 August 2025 in Journal of the Franklin Institute