1 January 2013 in Transportation Research Record: Journal of the Transportation Research Board
Because relatively few plug-in hybrid electric vehicles (PHEVs) have been deployed to date, existing analyses of the effects of PHEVs on gasoline and electricity demand have been based on the travel patterns of conventional vehicles and assumption-driven charging scenarios. A comprehensive analysis of a real-world fleet of 125 instrumented PHEV prototypes deployed in the United States over a 1-year period—likely the first application of a discrete choice model to the empirical analysis of plug-in vehicle charging—is presented. First, the trial is introduced, and the patterns of travel, charging behavior, and observed energy consumption are analyzed. Then, a mixed logit model of the decision to charge at the end of each trip is estimated. Results indicate that charging usually is done after the day's last trip when ending at home and when the next trip will occur in more than 3 h, even though significant heterogeneity exists between drivers. Finally, the performance of this fleet is simulated with different vehicle designs and charging patterns. Results indicate that aggressive opportunistic charging after every trip results in approximately the same fuel savings as increasing the battery size by a factor of five. However, fast charging provides only marginal changes in energy use for the observed use patterns.
1 October 2016 in Transport Policy
1 January 2014 in International Journal of Vehicle Design
After a precipitous drop from 1976-1982, the weight of US passenger cars has grown steadily. This article examines multiple conflicting influences on vehicle weight in two categories: technological changes that reduce vehicle weight and improvements in functionality that, ceteris paribus, add to vehicle weight. The widespread adoption of unibody construction, lightweight materials and smaller engines has been offset by growth in vehicle size and feature content. The best estimates from this work indicate that new features and functionality would have added at least 250 kg (550 lbs) to the weight of the average new car between 1975 and 2009, if not for offsetting improvements in technology. Over the same period, it is estimated that alternative materials, more weight-efficient vehicle architectures and reduced engine sizes have taken 790 kg (1700 lbs) out of the weight of the average car. These observable influences do not explain the full extent of the drop and subsequent growth in weight, suggesting that substantial non-observed technological improvements were made from 1976-1982 and that unobserved improvements in areas such as crashworthiness and NVH have added substantially to vehicle weight in the past two decades.
1 January 2014 in Transportation Research Procedia
In the development of environmentally friendly urban mobility, the shift away from non-renewable energy sources presents numerous challenges. Electric vehicles (EV's) can facilitate such a transition, while also reducing local pollution and noise in dense urban environments. However, the technical constraints of energy storage and recharging create a need to better understand how consumers use their vehicles and exactly how these vehicles consume energy. BMW has conducted two extensive field trials as part of the development of its production electric vehicle, the i3. In particular the data analysis is used to better understand the challenges in estimating an EV's Distance to Empty (DTE), which is defined as the actual distance the vehicle can be driven before recharging is required. This research shows that the main task of a DTE algorithm is to estimate the future energy consumption of the vehicle. For conventional algorithms, the DTE estimation error is large when there are significant changes in energy consumption from the past to the future. Thus this research attempts to quantify the changes in energy consumption between subsequent Drive-Charge events. The ActiveE data showed that auxiliary energy consumption (e.g. heating, defrosting, etc.) was significant and changed the most between Drive-Charge events. This means that an effective way to improve DTE algorithms would be to incorporate estimated changes in auxiliary energy consumptio
16 June 2017 in International Journal of Sustainable Transportation
16 April 2012 in SAE International Journal of Passenger Cars - Electronic and Electrical Systems
Passenger cars in the United States continue to incorporate increasing levels of technology and features. However, deployment of technology requires substantial development and time in the automotive sector.Prior analyses indicate that deployment of technology in the automotive sector can be described by a logistic function. These analyses refer to maximum annual growth rates as high as 17% and with developmental times of 10-15 years. However, these technologies vary widely in complexity and function, and span decades in their implementation.This work applies regression with a logistic form to a wide variety of automotive features and technologies and, using secondary regression, identifies broader trends across categories and over time. Developmental time, measured as the time to reach maximum growth, has declined exponentially and now stands at approximately ten years, although individual manufacturers have demonstrated the ability to implement technology more quickly than industry averages. While required safety features and emissions control technologies achieve faster deployment rates than optional features, there is not a clear casual relationship between an early requirement and rapid growth rate.The ability to develop and deploy technology quickly will be critical to meeting future fuel economy regulations. Technology deployment levels modeled in 2017 CAFE regulations fall broadly within the range of historical norms, but several specific technologies exceed historical application rates for non-safety applications.