Telah dilakukan studi analisis content buku ajar termodinamika dengan tujuan untuk mengetahui kebutuhan penggunaan modul berbasis Technological Pedagogical And Content Knowledge (TPACK) pada mata kuliah termodinamika. TPACK merupakan pengetahuan yang menggabungkan hubungan antara teknologi, pedagogik, dan konten secara sinergis. Metode penelitian ini adalah deskriptif kualitatif. Penelitian ini untuk menganalisis isi dari buku-buku referensi yang digunakan dalam pembelajaran. Teknik pengumpulan data menggunakan observasi dan angket. Hasil analisis kandungan TPACK pada buku ajar I, buku ajar II, buku ajar III masing-masing didapatkan prosentase sebesar 15,38%, 20%, dan 28,57%. Hasil angket responden 23 mahasiswa pendidikan fisika menyatakan bahwa 87% mahasiswa menyatakan perlunya dikembangkan modul termodinamika berbasis TPACK yang mendukung pemahaman konsep.
This study aims to see the impact of applying the flipped classroom to improve students critical thinking skills. The research design was the pretest-posttest controlled group design which consists of three groups taught different learning. Teacher applied direct instruction learning at the control group. Two other groups taught using a flipped classroom approach or online using Google Classroom. The participants of this study were 10th-grade students in physics subjects. Samples are taken randomly simple to determine groups. The analysis technique used is ANOVA to know the effect of learning strategies on critical thinking skills. Measurement of critical thinking skills is carried out using critical thinking test questions in the form of descriptions that have previously tested for difficulty and power of difference.
1 December 2019 in Universal Journal of Electrical and Electronic Engineering
Cu/Ni thin film has been made by electroplating method assisted by magnetic fields. The solution consists of a mixture of NiSO 4 (260 g/L), NiCl 2 (60 g/L) and H 3 BO 3 (40g/L). The magnetic field varied in the range of 0-200 gauss in a direction perpendicular to the electric field. Plating was carried out at a voltage of 1.5 volts, the electrolyte temperature is 60 C during 5 s. The results indicate that the Ni film has been formed on the surface of the Cu plate. Testing of sheet resistivity shows that by coating Ni on Cu substrate the resistivity sheet of Cu/Ni increases. The increase in resistivity is proportional to the magnitude of the magnetic field. Investigation on the Ni morphology shows that the larger the magnetic field the smaller the grain size so that the composition of Ni particles becomes more tightly packed. Whereas, in sensor sensitivity, all samples showed their role as low-temperature sensors. The sensitivity decreases along with the magnitude of the magnetic field given.
The COVID-19 pandemic has forced us to transform traditional learning methods into online or distance learning. This shift has affected not only students but also teachers and parents. Face-to-face learning was replaced by the use of platforms such as Google Classroom, WhatsApp groups, and others. Students, who previously interacted directly with teachers, had to adapt to learning through Google Classroom or WhatsApp groups. This transition required students to develop their own learning patterns and self-regulated learning (SRL). By combining simple online learning via WhatsApp groups or Google Classroom with more interactive learning methods, students' SRL can be enhanced. Observations from teachers and responses from students indicate that blended learning has a positive impact on SRL among vocational high school students.
The performance of a thin layer of Cu/Ni as a cryogenic sensor is produced by electroplating at various angles with the aid of a 200G parallel magnetic field. Liquid nitrogen (LN2) is a low-temperature medium with temperatures varying from 0oC to -200oC. The characterization includes the sensor voltage range, sensor resistance, and sensor sensitivity. Thermocouple TCA-BTA -200oC to 1400oC is used as a temperature calibrator. The results showed that all sensors could measure the LN2 temperature in the range of 20oC to -200oC corresponds to the thermocouple's ability to measure up to -200oC. Each sensor has its advantages, but the sensor produced from coating each 3 minutes sample with an angle of 90o has the largest output voltage range up to 0.058 V, and the coating at an angle of 0o with the sensitivity level as a function of T is S(T) = 0.0051 - 0.002T, while the 3 minutes coating sensor with an angle of 60o has the smallest voltage range of 0.0439 V and sensitivity (1.88 ± 0.05) V/oC.
30 April 2017 in Jurnal Riset dan Kajian Pendidikan Fisika