A company had a WNS10 boiler operating for 16 months when it experienced a catastrophic failure. The failure occurred at the edge of the T-weld between the shell cylinder and the rear tube plate at the rear of the furnace, and the weld cracked on the cylinder side. At the same time, the outer guard plate cracked due to the impact of airflow. We used macroscopic observation, physical analysis, metallographic analysis, and scanning electron microscope analysis to study the cause of the cracks. It was found that the fracture was mainly characterized by brittle fracture. The physical phase analysis found that the Ca and Si contents in the boiler water were high, and there was scaling at the failure site and severe corrosion under the scale. Finally, it was concluded that the boiler has apparent oxygen corrosion, subscale corrosion, and stress corrosion. Oxygen corrosion and corrosion under the role of scale corrosion in the boiler tube localized pits, pits tip part of the corrosion products due to the corrosion of the wedge caused by the addition of tensile stress and the emergence of micro-cracks. After the formation of micro-cracks in the boiler operating pressure, welding, and manufacturing process of residual stress and corrosive media under the joint action, cracks gradually expand, eventually leading to cracking.
18 July 2026 in Journal of Failure Analysis and Prevention