We demonstrate the advantage of combining non-diffractive beam shapes and femtosecond bursts for volume laser processing of transparent materials. By re-distribution of the single laser pulse energy into several sub-pulses with 25 ns time delay, the energy deposition in the material can be enhanced significantly. Our combined experimental and theoretical analysis shows that in burst-mode detrimental defocusing by the laser generated plasma is reduced, and the non-diffractive beam shape prevails. At the same time, heat accumulation during the interaction with the burst leads to temperatures high enough to induce material melting and even in-volume cracks. In an exemplary case study, we demonstrate that the formation of these cracks can be controlled to allow high-speed and high-quality glass cutting.
In conditions where the interaction between an atom and a short high-frequency extreme ultraviolet laser pulse is a perturbation, we show that a simple theoretical approach, based on Coulomb-Volkov-type states, can make reliable predictions for ionization. To avoid any additional approximation, we consider here a standard case: the ionization of hydrogen atoms initially in their ground state. For any field parameter, we show that the method provides accurate energy spectra of ejected electrons, including many above threshold ionization peaks, as long as the two following conditions are simultaneously fulfilled: (i) the photon energy is greater than or equal to the ionization potential, (ii) the ionization process is not saturated. Thus, ionization of atoms or molecules by the high order harmonic laser pulses which are generated at present may be addressed through this Coulomb-Volkov treatment.
The interaction of high power nanosecond laser pulses with absorbing defects, located in the bulk of transparent dielectric materials and having a multilevel electronic structure, is addressed. The model assumes a moderate localized initial absorption that is strongly enhanced during the laser pulse via excited state absorption and thermally driven generation of new point defects in surrounding material. This model is applied to laser induced damage initiation in the bulk of potassium dihydrogen phosphate crystals ( or KDP) and addresses how during a fraction of the pulse duration the host material around the defect cluster is transformed into a strong absorber that leads to the sufficiently large energy coupling resulting in a damage event. This scenario is supported by time resolved imaging of material modification during the initial phases of laser induced damage in KDP and fused silica.
Laser-induced glass processing has led to huge progress and applications over the last two decades. Here, we review recent advances in femtosecond laser-induced photochemistry in isotropic transparent oxide glasses specifically tailored with silver photoactive agents. The understanding of the influence of the considered glass matrix on the nature and properties of the created silver species is of prime importance. After presenting the key material properties, the formation mechanisms of laser-induced silver-based species are discussed, and potential technological applications are highlighted. Laser-induced processing of silver-containing oxide glasses paved the way for the fabrication of complex integrated waveguides and optical circuits with innovative fluorescent, nonlinear optical, and plasmonic properties. The universality of the method is expected to extend in any glass material that shows a similar laser-induced behavior in terms of silver cluster production.
When potassium dihydrogen phosphate crystals (KH2PO4 or KDP) are illuminated by multi-gigawatt nanosecond pulses, damages may appear in the crystal bulk. One can increase damage resistance through a conditioning that consists in carrying out a laser pre-exposure of the crystal. The present paper addresses the modeling of laser-induced damage and conditioning of KDP crystals. The method is based on heating a distribution of defects, the cooperation of which may lead to a dramatic temperature rise. In a previous investigation [Opt. Express 15, 4557-4576 (2007)], calculations were performed for cases where the heat diffusion was permitted in one and three spatial dimensions, corresponding respectively to planar and point defects. For the sake of completeness, the present study involves the 2D heat diffusion that is associated with linear defects. A comparison to experimental data leads to the conclusion that 1D calculations are the most appropriate for describing the laser-induced damage in KDP. Within this framework, the evolution of the damage density is given as a function of the laser energy density and an in-depth analysis of the results is provided based on simple analytical expressions that can be used for experimental design. Regarding the conditioning, assuming that it is due to a decrease in the defect absorption efficiency, two scenarios associated with various defect natures are proposed and these account for certain of the observed experimental facts. For instance, in order to improve the crystal resistance to damage, one needs to use a conditioning pulse duration shorter than the testing pulse. Also, a conditioning scenario based on the migration of point (atomic-size) defects allows the reproduction of a logarithmic-like evolution of the conditioning gain with respect to the number of laser pre-exposures. Moreover, this study aims at refining the knowledge regarding the precursor defects responsible for the laser-induced damage in KDP crystals. Within the presented modeling, the best candidate permitting the reproduction of major experimental facts is comprised of a collection of one-hundred-nanometer structural defects associated with point defects as for instance cracks and couples of oxygen interstitials and vacancies.
We present a formulation of the model of laser-plasma interaction (LPI) at hydrodynamical scales that couples the plasma dynamics with linear and nonlinear LPI processes, including the creation and propagation of high-energy electrons excited by parametric instabilities and collective effects. This formulation accounts for laser beam refraction and diffraction, energy absorption due to collisional and resonant processes, and hot electron generation due to the stimulated Raman scattering, two-plasmon decay, and resonant absorption processes. Hot electron (HE) transport and absorption are described within the multigroup angular scattering approximation, adapted for transversally Gaussian electron beams. This multiscale inline LPI-HE model is used to interpret several shock ignition experiments, highlighting the importance of target preheating by HEs and the shortcomings of standard geometrical optics when modeling the propagation and absorption of intense laser pulses. It is found that HEs from parametric instabilities significantly increase the shock pressure and velocity in the target, while decreasing its strength and the overall ablation pressure.