1 September 2015 in Corrosion Science
1 January 2012 in Thin Solid Films
1 August 2005 in Journal of Applied Physics
The effect of Pt alloy in Ni( and 10 at. %) on the agglomeration and Ge out diffusion in nickel germanosilicide formed on has been studied. A remarkable improvement in the agglomeration behavior with increasing Pt atomic percentage is observed by sheet resistance measurements while still maintaining Ni(Pt) monogermanosilicide phase between 400 and 800 °C. Ge out diffusion from the monogermanosilicide grains has been suppressed up to a temperature of 700 °C with the addition of Pt, evident by x-ray diffraction and micro-Raman spectroscopy. In addition, that improvement of surface morphology and suppression of Ge out diffusion with increasing Pt atomic percent is also confirmed by Rutherford backscattering and cross-sectional transmission electron microscopy. The improved morphology and agglomeration are explained by a grain-boundary model which includes kinetic effects. The suppression of Ge out diffusion from the germanosilicide grains is attributed to reduced atomic diffusion and the presence of stronger Pt–Si and Pt–Ge bonds due to the addition of Pt.
1 September 2009 in Current Applied Physics
26 July 2004 in Journal of Applied Physics
-doped thin films were deposited on substrate via a pulsed laser deposition. The deposited composite thin films were characterized by x-ray diffraction, scanning electron microscopy, and electro- and magneto-transport measurements. The main phase in the composite films was the perovskite phase. Texturelike microstructure was observed in the composite films while the average grain size remained almost unchanged compared to the pure samples. The metal-insulator transition temperature decreased as a result of the addition of and further reduced with increasing content. A maximum low field mangetoresistance of was achieved in the thin films, which could be well explained in terms of the grain boundary tunneling effect. The composition of the composite thin films can be easily tuned by adjusting the target composition. This method is believed to be applicable to exploring the combinations of other manganites and insulators.
1 August 2015 in Journal of Non-Crystalline Solids