1 June 2021 in Trends in Environmental Analytical Chemistry
1 June 2020 in Trends in Environmental Analytical Chemistry
2 August 2019 in Analytical Sciences
This paper discusses about the improvement of electrochemical characteristics of graphite paste electrode chemically modified with chitosan through physical crosslinking of the biopolymer with sodium tripolyphosphate. Biopolymer characterizations were performed by scanning electron microscopy, Fourier transform infrared spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The electrochemical characterization of Pb with graphite paste electrode modified with chitosan crosslinked with sodium tripolyphosphate (GPE-CTS-TPP) showed that the process is quasireversible, controlled by adsorption and involves the transfer of two electrons. Additionally, the physical crosslinking process decreased the electrode resistance as well as improved the electron transfer rate. Once the GPE-CTS-TPP showed enhanced morphological and electrochemical characteristics, it was applied for Pb determination by square wave anodic stripping voltammetry. The method presented appropriate accuracy (recoveries from 95 to 108% and concordance with comparative method between 90 and 107%), high sensitivity (limit of detection and quantification of Pb were 0.73 and 2.44 mu g L-1, respectively) and could be applied to analytical determinations.
1 January 2025 in Anais da Academia Brasileira de Ciências
Arsenic is found widely in nature, with mining and the use of pesticides in agriculture being the leading carriers of this metalloid. Considering the harm caused by As in cultivation media, a simple and sensitive method for arsenic speciation in paddy field water samples was developed by square wave cathodic stripping voltammetry using a hanging mercury drop electrode. Due to the low solubility of arsenic in mercury, this element was combined with Cu to form an intermetallic compound that is highly soluble (CuxAsy). In the case of As(V), it must first be reduced to As(III) with sodium thiosulfate to be later quantified by the difference in concentration between the inorganic As and As(III) total. Parameters such as concentration of HCl, Cu, and sodium thiosulfate (only for As(V)), potential deposition, frequency, and amplitude were evaluated. Under ideal conditions, limits of detection of 0.025 and 0.12 μg L-1 and limits of quantification of 0.082 and 0.39 µg L-1 were obtained for As(III) and As(V), respectively. The method presented high accuracy (recoveries from 97 to 110%) and was applied to determine both species in ten samples of paddy field water.