Low Earth Orbit (LEO) satellite communication is essential for wireless communication. While manufacturing and launching LEO satellites have become efficient and cost-effective, ground stations remain expensive due to complex designs for handling severe path losses and precise beam tracking. Hence, it is important to develop low cost and high-performance ground stations for widespread adoption of LEO satellite communication. Towards realizing this goal, we design a passive metasurface-enhanced LEO ground station system, named PMSat, combining metasurface's fine-grained beamforming capability with a small-size phased array's adaptive steering and focusing. For uplink, we jointly optimize the phase array codebook and uplink metasurface phase profile, and realize electronic steering by switching the codeword. We further jointly optimize the downlink metasurface phase profile to improve the focusing performance and enhance the received signal strength (RSS) over a wide range of incident angles. Our PMSat prototype consists of a single passive metasurface with 21 × 21 elements for uplink and 22 × 22 for downlink, along with 1 × 4 receiving and 1 × 4 transmitting phased array antennas. The effectiveness of our proposed PMSat is validated through extensive experiments, and results demonstrate that the optimized metasurface improves the SNR by 8.32 dB and 16.57 dB for uplink and downlink, respectively.
MmWave networks offer wide bandwidth for high-speed wireless communication but suffer from limited range and susceptibility to blockage. Existing coverage provisioning solutions not only incur high costs but also require significant expert knowledge and manual efforts. In this paper, we present AutoMS, an automated service framework to optimize mmWave coverage by strategically designing and placing low-cost passive metasurfaces. Our approach consists of three key components: (1) joint optimization of metasurface phase configurations and placement as well as access point beamforming codebooks. (2) a fast 3D ray-tracing simulator for accelerated large-scale metasurface channel modeling. (3) a metasurface design amenable to ultra-low-cost hot stamping fabrication, featuring high reflectivity, near 2π phase control, and wideband support. Simulation and testbed experiments show that AutoMS can increase the median received signal strength by 11 dB in target rooms and over 20 dB at previous blind spots, and improve the median throughput by over 3× in real-world scenarios.