15 November 2024 in Science
Subambient daytime radiative cooling enables temperatures to passively reach below ambient temperature, even under direct sunlight, by emitting thermal radiation toward outer space. This technology holds promise for numerous exciting applications. However, previous demonstrations of subambient daytime radiative cooling require surfaces that directly face the sky, and these cannot be applied to vertical surfaces that are ubiquitous in real-world scenarios such as buildings and vehicles. Here, we demonstrate subambient daytime radiative cooling of vertical surfaces under peak sunlight using a hierarchically designed, angularly asymmetric, spectrally selective thermal emitter. Under peak sunlight of about 920 watts per square meter, our emitter reaches a temperature that is about 2.5°C below ambient temperature, corresponding to a temperature reduction of about 4.3° and 8.9°C compared with a silica-polymer hybrid radiative cooler and commercial white paint, respectively.
29 May 2021 in Frontiers of Physics
Electrocatalytic CO2 reduction reaction (CO2RR) to obtain C2 products has drawn widespread attentions. Copper-based materials are the most reported catalysts for CO2 reduction to C2 products. Design of high-efficiency pseudo-copper catalysts according to the key characteristics of copper (Cu) is an important strategy to understand the reaction mechanism of C2 products. In this work, density function theory (DFT) calculations are used to predict nickel-zinc (NiZn) alloy catalysts with the criteria similar structure and intermediate adsorption property to Cu catalyst. The calculated tops of 3d states of NiZn3(001) catalysts are the same as Cu(100), which is the key parameter affecting the adsorption of intermediate products. As a result, NiZn3(001) exhibits similar adsorption properties with Cu(100) on the crucial intermediates *CO2, *CO and *H. Moreover, we further studied CO formation, CO hydrogenation and C-C coupling process on Ni-Zn alloys. The free energy profile of C2 products formation shows that the energy barrier of C2 products formation on NiZn3(001) is even lower than Cu(100). These results indicate that NiZn3 alloy as pseudo-copper catalyst can exhibit a higher catalytic activity and selectivity of C2 products during CO2RR. This work proposes a feasible pseudo-copper catalyst and provides guidance to design high-efficiency catalysts for CO2RR to C2 or multi-carbon products.
30 July 2026 in Nature Communications
Thermal radiation, a fundamental heat transfer mechanism, is crucial for energy exchange across various applications. However, conventional radiative heat transfer systems rely on omnidirectional thermal radiation, causing energy dissipation in undesired directions and limiting radiative heat transfer efficiency. Here, we show that perfectly matched directional thermal emission between an emitter and absorber can reach a theoretical efficiency up to 100%. In a parallel-plate configuration, replacing a conventional system with a customized directional system raises efficiency from 29% to 100%. We further experimentally demonstrate directional radiative heat transfer realizes substantial energy savings of 67.8% in vacuum and 28.7% in non-vacuum conditions. Moreover, directional radiative heat transfer enables efficient heating in diverse scenarios, including vehicle heating, car paint drying, human body heating, and rail car thawing, achieving 17–46% energy savings. Our work highlights the broad applicability and energy-saving potential of directional radiative heat transfer, opening new avenues for efficient energy utilization.
3 April 2018 in SAE International Journal of Advances and Current Practices in Mobility
This study introduces a new practical calibration approach of ductile fracture models by performing square punch tests on metal sheets. During square punch tests, ductile fracture occurs at either the corner of die or punch radius when applying different clamping loads and lubrication conditions. At the corner of die radius, in-plane pure shear is induced at the intersection between the side-walls and the flange by combined tension and compression. On the other hand, the material at the corner of the punch radius is under combined bending and biaxial tension. The material studied in this paper is advanced high strength steel (AHSS) DP780 from ArcelorMittal. Isotropic J2 plasticity model with mixed Swift-Voce hardening rule is calibrated from uniaxial tensile tests. The four-parameter modified Mohr-Coulomb (MMC4) fracture locus [1] was converted to all-strain-based modified Mohr-Coulomb (eMMC) fracture locus and fracture forming limit diagram (FFLD) in the space of principal strains under plane stress condition. The eMMC and FFLD [2] can be calibrated directly from measured fracture strains at die and punch radius of the AHSS sheets in square punch tests, as well as from uniaxial tensile tests. For analyzing possible close to shear-induced fracture by different combinations of tension and compression at the die radius, the DP780 sheets were arranged at 45° with respect to the orientation of the square punch. The square punch tests were simulated in Abaqus/Explicit. The finite element results show that the force-displacement response of the punch, the fracture initiation and crack propagation at the critical locations in square punch tests were correctly predicted. The load path of the mid-surface at the die radius was found close to proportional loading of in-plane shear.