14 July 2008 in Applied Physics Letters
We demonstrate a metamaterial device whose far-infrared resonance frequency can be dynamically tuned. Dynamic tuning should alleviate many bandwidth-related roadblocks to metamaterial application by granting a wide matrix of selectable electromagnetic properties. This tuning effect is achieved via a hybrid-metamaterial architecture; intertwining split ring resonator metamaterial elements with vanadium dioxide -a material whose optical properties can be strongly and quickly changed via external stimulus. This hybrid structure concept opens a fresh dimension in both exploring and exploiting the intriguing electromagnetic behavior of metamaterials.
6 August 2007 in Applied Physics Letters
A process is demonstrated for tuning the magnetic resonance frequency of a fixed split-ring resonator array, by way of adding material near the split-ring elements. Applying drops of a silicon-nanospheres/ethanol solution to the surface of the sample decreases the magnetic resonance frequency of the split-ring array in incremental steps of 0.03THz. This fine tuning is done post fabrication and is demonstrated to be reversible. The exhibited sensitivity of the split-ring resonance frequency to the presence of silicon nanospheres also suggests further application possibilities as a sensor device.
23 October 2006 in IEEE Photonics Technology Letters
Optical sensors are attractive for integrated chip-scale sensor systems. In this letter, integrated microdisk sensors have been fabricated and characterized for five different D-glucose concentrations in deionized water. The microdisk sensor reported is in an orthogonal configuration, reducing the sensor size toward chip-scale sensor applications. The measured wavelength shift in the resonant peak of the microdisk sensors has a linear response as a function of D-glucose concentration. The estimated sensitivity (defined by Deltalambdaresonant/wt%D-glucose) of the fabricated microdisk sensor for the D-glucose solution was 0.12[nm/wt%] based on the slope of the linear regression line from the measured results
27 October 2003 in IEEE Journal of Selected Topics in Quantum Electronics
Emerging techniques for integrating optoelectronic (OE) devices, analog interface circuitry, RF circuitry, and digital logic into ultra-mixed signal systems offers approaches toward and demonstrations of integrated optical interconnections in electrical microsystems. As rising data rates dictate the use of optical interconnections and interfaces at increasingly smaller distances, optical interconnections stand at a threshold of opportunity for pervasive implementation if cost-effective integration process technology and performance can be implemented. Heterogeneous integration is one approach toward the integration of compound semiconductor OE devices, Si CMOS circuits, and organic materials. Heterogeneous integration approaches, which utilize dissimilar materials which can be independently grown and optimized, and are subsequently bonded together into an integrated system, are particularly attractive methods for creating high-performance microsystems. This paper describes a variety of optical interconnections integrated into microsystems using thin film heterogeneous integration. Thin film heterogeneous integration is attractive from the standpoint that the topography of the integrated microsystem can remain flat to within a few microns, substrates which are often optically absorbing are removed, both sides of the thin film devices can be processed (e.g., contacted, optically coated), and three-dimensionally stacked structures can be implemented. Demonstrations of interconnections using thin film heterogeneous integration technology include an integrated InGaAs/Si CMOS receiver circuit operating at 1 Gbps, an InGaAs thin film photodetector bonded onto a foundry Si CMOS microprocessor to demonstrate a single chip optically interconnected microprocessor, smart pixel emitter and detector arrays using resonant cavity enhanced P-i-N photodetectors bonded on top of per-pixel current controlled oscillators and resonant cavity enhanced light emitting diodes integrated onto digital to analog converter gray-scale per-pixel driver circuitry, and photodetectors embedded in waveguides on electrical interconnection substrates to demonstrate chip-to-chip embedded waveguide interconnections.
1 January 2009 in New Journal of Physics
We have designed, fabricated and characterized integrated directional couplers capable of converting the mode of an optical dielectric waveguide into a long-range plasmon propagating along a thin metal stripe. We demonstrate that the coupling between the two types of waveguides is generally very weak unless specific conditions are met. This sensitivity could be potentially exploited in sensing applications or for developing novel active photonic components.
25 February 2008 in Physical Review A
We report on the characterization of long-range surface plasmon waveguide bends at telecom wavelengths . The structures consist of a thin Au stripe embedded in a transparent polymer film. When the polymer thickness is larger than the lateral extension of the plasmon, the stripe sustains a conventional long-range mode; in the opposite case, the mode is hybrid because its field distribution is confined by total internal reflection in the dielectric cladding. This hybridization increases the damping by absorption but dramatically reduces the radiation loss that occurs for curved geometries, such as bends. Our results are supported quantitatively by full-wave finite-element simulations.