19 September 2020 in Topics in Catalysis
1 December 2019 in Optical Materials
1 July 2014 in Advanced Powder Technology
30 November 2012 in Advanced Powder Technology
SLSiriporn Larpkiattaworn
TWThanakorn Wasanapiarnpong
Thanakorn Wasanapiarnpong
1 October 2019 in Key Engineering Materials
Hot molding is one of the most important processes for the manufacture of friction materials in automotive brake systems. That is because it has direct impacts on the physical and mechanical properties. Porosity and compressibility affect properties like brake vibration. This then affects brake noise. Therefore, the objective of this work was to study the effects of hot molding conditions on the porosity and compressibility of friction materials. The crucial parameters; molding pressure, temperature and holding time were varied in the hot molding process. Porosity and compressibility were investigated and analyzed in relation to the manufacturing parameters using statistical analysis. The results and the correlation coefficients (R2) show that molding pressure and holding time are the most significant effects on porosity and compressibility. They indicate that the hot molding parameters can adequately explain porosity and compressibility.
1 April 2012 in Advanced Materials Research
ZnO nanoparticles were successfully synthesized by using zinc dust waste derived from hot-dip galvanizing process as a starting materials via simple hydrothermal method. The zinc dust powder was dissolved in nitric acid, adjusted pH with NaOH and hydrothermally treated at 120-170°C in an oven. The resultant products were characterized for phase, surface area and morphology by X-ray diffraction (XRD), Brunauer-Emmet-Taller (BET) and Scanning electron microscopy (SEM), respectively. Moreover, the photocatalytic activity was investigated by a photodegradation of methylene blue solution under black light irradiation. It was shown that crystallinity of pure ZnO phase, was influenced by solution and hydrothermal treatment temperature. The experimental results exhibited that the crystallinity of ZnO significantly affected its photocatalytic activity. The highest photocatlytic activity was obtained from powders with average crystallite size of 51 nm and surface area of 13.4 m2/g prepared under pH12 and hydrothermally treated at 170°C for 6 h. Moreover, the synthesized ZnO powders performed a good antibacterial activity evaluated using a colony count method with Escherichia coli under the dark condition.