Sequential infiltration synthesis (SIS) is an emerging materials growth method by which inorganic metal oxides are nucleated and grown within the free volume of polymers in association with chemical functional groups in the polymer. SIS enables the growth of novel polymer-inorganic hybrid materials, porous inorganic materials, and spatially templated nanoscale devices of relevance to a host of technological applications. Although SIS borrows from the precursors and equipment of atomic layer deposition (ALD), the chemistry and physics of SIS differ in important ways. These differences arise from the permeable three-dimensional distribution of functional groups in polymers in SIS, which contrast to the typically impermeable two-dimensional distribution of active sites on solid surfaces in ALD. In SIS, metal-organic vapor-phase precursors dissolve and diffuse into polymers and interact with these functional groups through reversible complex formation and/or irreversible chemical reactions. In this perspective, we describe the thermodynamics and kinetics of SIS and attempt to disentangle the tightly coupled physical and chemical processes that underlie this method. We discuss the various experimental, computational, and theoretical efforts that provide insight into SIS mechanisms and identify approaches that may fill out current gaps in knowledge and expand the utilization of SIS.
An atmospheric pressure microplasma jet is developed for depositing homogeneous thin films from . The adjustment of the gas flow through the microplasma jet assures optimal flow conditions as well as minimizes deposition inside the jet. In addition, the formation of an argon boundary layer surrounding the emerging plasma beam separates the ambient atmosphere from the flow of growth precursor. Thereby the incorporation of nitrogen and oxygen from the ambient atmosphere into the deposited film is suppressed. Soft polymerlike hydrogenated amorphous carbon films are deposited at the rate of a few nm/s on the area of a few square millimeters.
25 February 2008 in Journal of Physics D: Applied Physics