22 January 2020 in Journal of Physics D: Applied Physics
We report on the effects of two different molecular beam epitaxy growth modes on the performance of In 0.14 Ga 0.86 As/GaAs quantum well infrared photodetectors (QWIPs). The performance of quantum well (QW) materials are characterized by photoluminescence (PL), x-ray diffraction, and high resolution transmission electron microscope, and a systematic photoelectric characterization is carried out for these InGaAs/GaAs QWIPs. The results indicate that the introduction of continuous low temperature growth can effectively reduce In atom interdiffusion while maintaining the higher PL intensity. QWIPs grown by the low temperature method show the bound-to-bound intraband transition mode as initially designed, whereas the high temperature during the growth makes the operating mode of the device changing to bound-to-quasi continuous mode, which affects the performance of the quantum well infrared photodetectors. Compared with InGaAs/GaAs QWIP fabricated by the temperature-changed growth method, the peak responsivity of the low-temperature grown sample is increased by a factor of 38 and reaches 5.67 A W −1 at 20 K, indicating high responsivity of InGaAs/GaAs QWIP. The reason is attributed to the pronounced increase of photoconductive gain in the device with the B–B working mode. Furthermore, the background limited performance temperature ( T BLIP ) of low-temperature grown QWIPs is improved by ~10 K.
14 August 2018 in Journal of Physics D: Applied Physics
A novel structure to achieve long wavelength infrared broadband detection ranging from 7.6–10.4 µ m is proposed via quantum cascade detector. With a pair of identical coupled quantum wells separated by a thin barrier, acting as absorption regions, the relative linewidth (Δ E / E ) of response can be dramatically broadened to 30.7%. Moreover, this structure introduces about 30% enhancement in blackbody responsivity. It is shown that the spectral shape can be tuned by the bias voltage effectively, while it is insensitive to the working temperature. The device can work at liquid nitrogen temperature with Johnson noise limited blackbody detectivity of 5.4 × 10 8 Jones.
4 February 2020 in Journal of Applied Physics
A novel high-efficiency microcavity structure of quantum wells sandwiched between periodic heavily Si-doped GaAs top contact gratings and bottom contact film has been proposed as the optical coupler of a terahertz quantum well photodetector (THz QWP). Similar to metal at visible light, highly doped semiconductors exhibit plasma frequencies at mid- and far-infrared wavelengths. The intersubband absorption spectra and electric field distribution of the microcavity THz QWP are calculated with the finite difference time-domain method. Our results indicate that the frequency of the surface plasmon polariton can be tuned to the microcavity resonant mode under an optimized structure and the intersubband absorption is efficiently enhanced by the microcavity structure. When the doping concentration of the contact exceeds 1018 cm−3, the intersubband absorption of the microcavity THz QWP at the response wavelength is over one order of magnitude higher than that of the standard 45° device. In addition, the angle of the incident light only influences the intensity of the absorptivity, indicating that the designed device was independent of the periodic surface structure.
9 May 2018 in Journal of Physics D: Applied Physics
A hybrid structure consisting of periodic gold stripes and an overlaying gold film has been proposed as the optical coupler of a long-wave quantum well infrared photodetector. Absorption spectra and field distributions of the structure at back-side normal incidence are calculated by the finite difference time-domain method. The results indicate that the intersubband absorption can be greatly enhanced based on the waveguide resonance as well as the surface plasmon polariton (SPP) mode. With the optimized structural parameters of the periodic gold stripes, the maximal intersubband absorption can exceed 80%, which is much higher than the SPP-enhanced intersubband absorption (<50%) and about 6 times the one of the standard device. The relationship between the structural parameters and the waveguide resonant wavelength is derived. Other advantages of the efficient optical coupling based on waveguide resonance are also discussed.
6 December 2018 in Materials Research Express
The anomalous arsenic (As) diffusion at the In0.53Ga0.47As/InP interface grown by solid source molecular beam epitaxy has been reported in this work. Heterointerface samples were grown using group-V switches of P2 to As2 or to As4. High-resolution X-ray diffraction (XRD), photoluminescence (PL), 3-D atom probe (3DAP) and high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM) data have shown that, an up to hundred-nanometer-thick composition-graded InAsyP1-y layer formed in the InP buffer layer for the sample grown by P2 to As2. This observation demonstrates a rapid replacement of P by As atoms at the heterointerface and a deep As diffusion into the lower InP buffer. In contrary, a sharper heterointerface without the composition-graded layer was obtained in the sample grown using P2 to As4. These findings give insight into the distinct properties of different As species in the InGaAs/InP interface growth.