Pulsed currents and magnetic forces of an induction system with a spiral winding and a ferromagnetic shield for processing non-magnetic thin-sheet metal strips in order to create magnetoplastic, electroplastic effects due to eddy currents are studied. Under the strip there is the ferromagnetic shield, and above it – spiral winding. The aim of the work is to develop an analytical method for calculating transients of pulsed currents in an electric circuit with the induction system and a capacitor charged to certain voltage taking into account influence of the ferromagnetic shield to perform investigation of time-varying magnetic field. Electromagnetic parameters of the inductor are determined by computer simulation using the finite element method in the mode of harmonic currents. Current transients in the electric circuit are calculated using known in theoretical electrical engineering mathematical dependences and distribution of current density and magnetic forces in the strip is calculated by the finite element method in the mode of transients. Influence of the ferromagnetic shield on electromagnetic processes in the induction system for the set ranges of strip’s thickness, its electrical conductivity and current frequency is established. Electromagnetic force between the spiral winding and the strip, the current density in the strip, as well as the moments of time at which the current and force have maximum values are studied. References 14, figures 6, tables 2.
To convert the energy of sea waves, the use of cylindrical (with a radial magnetic flux) three-phase magnetoelectric generators with a permanent magnet rotor using a mechanical gearbox to increase the rotor speed is considered. Given the real rotor motion, a mathematical model has been developed to calculate the distribution of magnetic fields in the gap of the generator, and functional dependences of the flux linkage of the winding and the electromagnetic moment of the generator on its design and the parameters of permanent magnets have been obtained. For the adopted design, the electromagnetic moment, the distribution of phase currents in the windings, the power and voltage of the generator are determined. A comparison is made of the energy performance of generators with a traditional float drive and using a ratchet to ensure one-sided rotation of the rotor. The expediency of using a ratchet generator to convert the energy of sea waves is considered. References 6, figures 7.
20 September 2021 in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini
A review of the literature on the use of pulsed electric current to create electro-plastic effect in metal parts is performed. Inductor with a U-shaped magnetic core and pulsed current is investigated for processing thin-walled metal plates with rectilinear welds. With a saturated magnetic core relative magnetic permeability can be low, so using a magnetic core can be impractical. The aim of the work is to establish the influence of a magnetic core of an induction system on voltage, current and magnetic forces when reaching the eddy current density of 109 A/m2 in the weld of a non-magnetic thin-walled metal plate. A two-dimensional model of the induction system with and without the magnetic core is investigated here. Simulation of the distribution of electromagnetic fields with the reduction of the parameters of the two-dimensional model to three-dimensional is performed. A capacitor charged to a certain voltage is a source of pulsed currents in inductor winding. The equation of the electric circuit for determining the current in the inductor’s winding is solved. The influence of the dimensions of the magnetic core on voltage and currents in the inductor’s winding is determined. The influence of the magnetic core on the transients of voltages of capacitor and inductor, the currents in the winding and the weld of the metal non-magnetic plate, the magnetic forces in the weld is studied. The influence of the magnetic core on distribution of magnetic field strength, currents and magnetic forces on the surface of the plate in the area of the weld is studied. Ref. 13, Fig. 4, Table.
19 March 2020 in Praci Institutu elektrodinamiki Nacionalanoi akademii nauk Ukraini