Silicon (Si) films were deposited on low-cost graphite substrates by the electrochemical reduction of silicon dioxide nanoparticles (nano-SiO2) in calcium chloride (CaCl2), melted at 855 °C. Cyclic voltammetry (CV) was used to analyze the electrochemical reduction mechanism of SiO2 to form Si deposits on the graphite substrate. X-ray diffraction (XRD) along with Raman and photoluminescence (PL) results show that the crystallinity of the electrodeposited Si-films was improved with an increase of the applied reduction potential during the electrochemical process. Scanning electron microscopy (SEM) reveals that the size, shape, and morphology of the Si-layers can be controlled from Si nanowires to the microcrystalline Si particles by controlling the reduction potentials. In addition, the morphology of the obtained Si-layers seems to be correlated with both the substrate materials and particle size of the feed materials. Thus, the difference in the electron transfer rate at substrate/nano-SiO2 interface due to different applied reduction potentials along with the dissolution rate of SiO2 particles during the electrochemical reduction process were found to be crucial in determining the microstructural properties of the Si-films.
The synthesis of single crystal is an area of intense activity in the materials science. The obtaining of the single crystal with sufficient dimension for X-ray diffraction depends on several factors including the chemical composition, crystal structure of the reagents, and physical parameters (temperature and pressure). In this context, this chapter is dedicated to the description of the most common synthesis methods of single crystal in the solid-state chemistry: solid-state method, hydrothermal, and slow evaporation at room temperature. Same other materials can be obtained at high pressure. There are also some physical techniques to grow single crystal, each technique is specific for specific materials.