9 September 2022 in Science
Hydroformylation with unmodified cobalt carbonyl catalyst plays a crucial role in industrial production of surfactants and plasticizers. However, syngas pressures of 100 to 400 bar with reaction temperatures of 100° to 250°C are typically applied. We report here that unmodified cobalt carbonyl is a stable hydroformylation catalyst at 140°C under 30 bar of syngas. The activity was comparable to that of recently reported bisphosphine-coordinated cobalt(II) catalysts, which we could not reproduce under the reported conditions. Kinetic and in situ infrared spectroscopic studies confirmed the stability of the unmodified cobalt tetracarbonyl hydride [HCo(CO) 4 ]. Branched internal olefins were converted to aldehydes with high regioselectivity under low syngas pressures without phosphorus ligands. Bisphosphines had a small promotional effect on the catalyst at phosphorus-to-cobalt loading ratios below 0.6.
2 December 2021 in ChemTexts
Hydroformylation is one of the most important homogeneously catalyzed reactions on an industrial scale. The manufacture of bulk chemicals clearly dominates. Large cobalt- and rhodium-based processes are mature technologies that have been developed over the past 80 years. Meanwhile, the potential of hydroformylation for the production of fine chemicals (perfumes, pharmaceuticals) has also been recognized. This review gives insight into the state-of-the-art of the reaction and its development. It commences with some remarks on the accidental discovery by the German chemist Otto Roelen within the historical and personal framework of the Fischer–Tropsch process, followed by the mechanistic basics of the catalytic cycle, metals used for the catalyst as well as their organic ligands. In addition, the stability of ligands and catalysts is addressed. The huge potential of this transformation is demonstrated using a variety of substrates. Finally, the use of some surrogates for syngas is discussed.
7 May 2026 in Journal of the American Chemical Society
Alkoxycarbonylation of olefins is a pivotal transformation in the production of esters; however, attaining high regioselectivity in this transformation, specifically using industrially relevant aliphatic olefins, remains a formidable challenge. To date, this objective has been achieved exclusively through the integration of precious Pd catalysts and costly phosphine ligands in a pressurized CO environment at high temperatures. In this study, we present a novel cobalt-catalyzed light-driven protocol for achieving excellent regioselectivity under mild conditions. Specifically, we demonstrate the efficacy of converting propylene, as well as terminal and internal linear olefins, to the corresponding terminal esters with over 90% regioselectivity, accompanied by a wide range of alcohols. Control experiments and DFT computations reveal that light promotes the formation and maintains the concentration of the key species HCo(CO)3.
6 August 2025 in ChemSusChem
Direct carbonylation of the C(sp3)Cl bond remains a challenging transformation in the chemical industry. The usual use of precious metals, the high cost of ligands, and the lack of recyclability of catalysts make their industrial application on a large scale impossible. A ligand‐free cobalt‐based catalyst for the alkoxycarbonylation of chloroacetates to dialkyl malonates, which are important industrial intermediates, is reported here. This catalyst uses an extremely inexpensive precursor, CoCO3, with a very low catalyst loading (0.5 mol%) to achieve product yields of up to 99% with nearly 100% chemoselectivity. Solvents and previously essential phase transfer agents are not needed. Most importantly, the catalyst can be easily recycled without losing its activity and selectivity. Over 95% product yield is achieved even after 8 recycles. The feasibility of this system is demonstrated through 14 examples of the alkoxycarbonylation reaction. Fourier transform infrared spectroscopy investigations identified the active cobalt species as [Co(CO)4]−. As the first recyclable cobalt‐based catalyst, this ligand‐free system has great potential for large‐scale industrial transfer.
25 November 2025 in Chem Catalysis