Ira Devi Sara

Ira Devi Sara

Auto-generated profile, based on publicly available information

Ira Devi Sara

Universitas Syiah Kuala

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 August 2024 in IEEE Access
Verified
Journal Article
Open access
ASAsri
Asri
YAYuwaldi Away
Yuwaldi Away
NNNasaruddin Nasaruddin
Nasaruddin Nasaruddin
ISIra Devi Sara
Ira Devi Sara
Andri NovandriAndri Novandri
Andri Novandri
This paper proposes a new method for predicting the energy generated by Photovoltaic (PV) panels with coolant Calcium Chloride (CaCl2). The study seeks to address heat-related issues that can affect the performance of PV panels by reducing their operational temperature. High operational temperatures can decreased electricity production, potentially cause permanent damage to solar cells, and shorten the panel’s lifespan. Calcium Chloride compound possesses hygroscopic properties, meaning it can absorb water from the surrounding air, thus serving as a cooling material. Calcium Chloride compound is applied as crystalline granules placed in a container beneath the PV panel. This research seeks to evaluate the effect of Calcium Chloride usage on reducing the operational temperature of PV panels and its influence on increasing PV efficiency. Subsequently, using the temperature data of the PV panel, modeling is performed to predict the PV output power using three predictive models: Multiple Linear Regression (MLR), Temperature Coefficient of Power (TC-P), and Artificial Neural Network (ANN). These three models are then compared to test their effectiveness. The research results indicate that using Calcium Chloride as a coolant is highly effective in improving the performance and efficiency of PV panels. Additionally, the ANN model accuratelly predicts power output based on temperature condition variations, with a Coefficient of Determination ( R 2 = 0.98).

16 June 2025 in IEEE Access
Verified
Journal Article
Open access
ENElvy Sahnur Nasution
Elvy Sahnur Nasution
YAYuwaldi Away
Yuwaldi Away
SYSyahrial
Syahrial
ISIra Devi Sara
Ira Devi Sara
Andri NovandriAndri Novandri
Andri Novandri
This paper proposes a predictive model based on an Artificial Neural Network (ANN) optimized with Support Vector Regression (SVR) to predict seismic parameters as part of earthquake risk mitigation for substations. The proposed model aims to improve the accuracy of seismic parameter predictions, including seismic energy, Peak Ground Acceleration (PGA), and Modified Mercalli Intensity (MMI). A case study was conducted in the Aceh region, Indonesia, which is located near the subduction zone between the Indo-Australian Plate and the Eurasian Plate, making it highly seismically active. Therefore, this model is developed to identify substations most at risk of earthquake impacts while supporting disaster mitigation planning through early warning systems. The dataset used in the modeling includes information on the epicenter and substation coordinates, earthquake magnitude, depth, and the distance between the two points. The ANN training process uses backpropagation with sigmoid and tanh activation functions. The ANN outputs are then used as input features for the SVR model, applying a Radial Basis Function (RBF) kernel to capture the non-linear relationships between variables. Evaluation results show that the hybrid SVR-ANN model significantly improves prediction accuracy compared to conventional ANN. This improvement is indicated by a reduction in error and an increase in the coefficient of determination (R2). The findings of this paper can serve as a foundation for developing more effective mitigation systems to reduce earthquake impacts on electrical infrastructure.

1 June 2022 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
SJSaifuddin Muhammad Jalil
Saifuddin Muhammad Jalil
HHHusaini Husaini
Husaini Husaini
RMRizal Munadi
Rizal Munadi
ISIra Devi Sara
Ira Devi Sara
This paper presents the design and development of an automatic dual energy solar powered Moringa dryer used to remove moisture. Moringa leaves are circulated by hot air evenly in a cylindrical mesh of aluminum mesh which rotates at 20 revolutions per minute through which hot air is passed to extract moisture from the leaves. The Arduino Uno or Atmega32 microcontroller works in conjunction with appropriate sensors to monitor and control humidity, moisture content, motor speed, room temperature, heater, and fan. Based on the moisture content in the Moringa leaves, the sensor sends a control signal to the controller. The results showed a good response in removing the initial moisture content from 18.5% to the final moisture content to 4% of green leaves without changing the nutritional value. Qualitative analysis showed that traditional drying, namely open drying, drying Moringa leaves each for 3 days in 12 hours with a final moisture content of 7%, while double solar drying only takes 3 days in 12 hours with a final moisture content of 4%, and produce better quality Moringa leaves. High efficiency in the drying process of Moringa leaves compared to traditional drying, where this tool can dry Moringa leaves faster by 3%.

18 April 2025 in IEEE Access
Verified
Journal Article
Open access
PSParlin Siagian
Parlin Siagian
ISIra Devi Sara
Ira Devi Sara
TTTarmizi Tarmizi
Tarmizi Tarmizi
NNNasaruddin Nasaruddin
Nasaruddin Nasaruddin
The main contribution of this paper is to propose a methodology for the electromagnetic design of axial split segmentation switched reluctance generators (SRGs) to optimize power and torque. This paper investigates the impact of generator geometry segmentation on performance, addressing the longstanding challenges of torque ripple and power density. The hypothesis suggests that dividing the stator magnetization at each rotor angle can counteract the opposing machine torque, thereby improving torque ripple and enhancing power density. A mixed-methods approach combining literature review, simulation, and experimental validation was used to evaluate torque retarding effects and machine power density. The results demonstrate a significant reduction in torque ripple (59.3%) and an increase in power density 603.3 kW/m3 across all four segments. Specifically, axial separation segmentation markedly enhanced power density and design efficiency compared to conventional SRG designs. This paper provides novel insights into improving torque ripple and power output while maintaining the same overall machine dimensions at 1206.6 watts. Additionally, the simpler fabrication process of axial segmentation—where each segment maintains the same diameter—offers distinct advantages over radial segmentation, making it more practical for manufacturing. These findings highlight the potential for harvesting low-power driving energy from natural sources, contributing to advancing renewable energy technologies. So, the improvements in torque ripple reduction and power density provide valuable directions for optimizing SRGs, with further potential for enhancing driving turbine performance and utilizing better materials for greater energy harvesting efficiency.

1 January 2022 in International Journal of Renewable Energy Research
Verified
Journal Article
Open access
PDF file
APAdi Prasetiyo
Adi Prasetiyo
TTTarmizi Tarmizi
Tarmizi Tarmizi
ISIra Devi Sara
Ira Devi Sara
INIndonesia Nagoro
Indonesia Nagoro
This paper presents the design and implementation of an improved cascaded multilevel inverter topology with symmetrical DC source with minimum number of switching and minimum conducting switches during operation The proposes new topology is designed as a stand-alone system and simulated using resistive and inductive loads. One drawback of the others topology is the occurrence of voltage surges in the inductive load due to the emf effect. By using a capacitor on the dc bus as a compensation, the emf effect can be minimized. The size of the capacitor used should be proportional to the reactive power of the load. The proposed new topology is more efficient in use of switching components, conducting switches and can overcome inductive loads. It can generate 21 level with 14 switches needed and only 3 conducting switches during operation. The value of THDv and THDi from the proposed new topology is 3.76% and 0.93%, it varies depending on the value of the load received.

14 February 2025 in IEEE Access
Verified
Journal Article
Open access
HLHari Anna Lastya
Hari Anna Lastya
YAYuwaldi Away
Yuwaldi Away
TATarmizi
Tarmizi
ISIra Devi Sara
Ira Devi Sara
RORoslidar
Roslidar
Andri NovandriAndri Novandri
Andri Novandri
This study proposes an Adaptive Neuro-Fuzzy Inference System (ANFIS) based on model with Parallelization Control Technique (PCT) implemented in a triple-axis sun tracker system. The system aims to maximize solar energy absorption by minimizing the angle of incidence of sunlight on Photovoltaic (PV) panels. It is designed with three manipulator arms, each controlled in parallel by a distinct ANFIS model. The primary goal is to adjust the PV panel orientation to optimal azimuth and altitude angles. The tetrahedron sensor is employed to detect the direction of sunlight. This study tests various types of consequent rules to find the optimal configuration for each ANFIS model, including first-order, second-order, and third-order polynomial functions. The analysis results show that the second-order consequent rule provides the highest accuracy across the three ANFIS models. The proposed system can cover azimuth range from 0° to 360° and altitude angle from 60° to 90°. The experiment also demonstrated that the system consistently moves toward a stable condition, even in the presence of minor disturbances. These findings indicate that ANFIS with PCT can minimize the angle of sunlight incidence, enhance system flexibility, and accelerate response time, making it a viable solution for increasing energy harvesting by PV panels.