10 February 2010 in Environmental Science and Pollution Research
17 July 2020 in Environmental Science: Water Research & Technology
On-site demonstration tests evaluated 1,4-dioxane removal in reverse osmosis permeate (RO permeate) at the Orange County Water District (OCWD) Advanced Water Purification Facility (AWPF). The study used a pilot-scale ultraviolet (UV) reactor to compare efficacy of UV/chloramine, UV/chloramine/H2O2 and UV/chloramine/HOCl advanced oxidation processes (AOPs). The UV/chloramine process did not achieve the targeted 0.5 log removal of 1,4-dioxane even at a high UV fluence of 4400 mJ cm−2 and the 1,4-dioxane decay did not follow pseudo-first order kinetics. Oxidant concentrations as low as 2.6 mg L−1 H2O2 or ∼1.0 mg L−1 free Cl2 (HOCl) in the RO permeate at ambient quality parameters, e.g. 2.2–2.4 mg L−1 monochloramine (as Cl2), 1.2–1.4 mg L−1 dichloramine (as Cl2), ≤0.08 mg L−1 NO2 − (UV/H2O2 AOP), ∼97.0% T, resulted in 0.56 and ≥0.51 log reduction of 1,4-dioxane with the UV/chloramine/H2O2 and UV/chloramine/HOCl process, respectively, while simultaneously achieving ∼2.0 log reduction of NDMA. Overall, the UV/chloramine/HOCl process showed higher removal efficiency of 1,4-dioxane than UV/chloramine/H2O2 for the same mass-based oxidant concentrations and process conditions. Nitrite ions present in the RO permeate and/or generated from monochloramine photolysis during the UV/AOP impacted significantly the process performance. It was confirmed through these pilot-scale tests that the removal of 1,4-dioxane in the UV/chloramine/H2O2 and UV/chloramine/HOCl processes can be predicted accurately with a comprehensive mechanistic kinetic model that accounts for the molecular and radical reactions that occur in the RO permeate in the UV reactor.
13 February 2019 in Environmental Science & Technology
1 January 2010 in Water Science & Technology
Arsenic is a widespread contaminant in the environment around the world. The most abundant species of arsenic in groundwater are arsenite [As(III)] and arsenate [As(V)]. Several arsenic removal processes can reach good removal yields only if arsenic is present as As(V). For this reason it is often necessary to proceed with a preliminary oxidation of As(III) to As(V) prior to the removal technology. Several studies have focused on arsenic oxidation with conventional reagents and advanced oxidation processes. In the present study the arsenic oxidation was evaluated using hydrogen peroxide, UV radiation and their combination in distilled and in real groundwater samples. Hydrogen peroxide and UV radiation alone are not effective at the arsenic oxidation. Good arsenic oxidation yields can be reached in presence of hydrogen peroxide combined with a high UV radiation dose (2,000 mJ/cm2). The quantum efficiencies for As(III) oxidation were calculated for both the UV photolysis and the UV/H2O2 processes.