For high-electron-mobility transistors based on two-dimensional electron gas (2DEG) within a quantum well—such as those based on AlGaN/GaN heterostructures—a Schottky gate is used to maximize the amount of charge that can be induced and thereby the current that can be achieved. However, the Schottky gate also leads to very high leakage current through the gate electrode. Adding a conventional dielectric layer between the nitride layers and gate metal can reduce leakage; but this comes at the price of a reduced drain current. We used a ferroic HfO 2 - ZrO 2 bilayer as the gate dielectric and achieved a simultaneous increase in the ON current and decrease in the leakage current, a combination otherwise not attainable with conventional dielectrics. This approach surpasses the conventional limits of Schottky GaN transistors and provides a new pathway for improved performance in transistors based on 2DEG.
Ferroelectricity at atomic-scale thickness would have important applications in next-generation electronics. Here, we report that a ferroelectric phase can be stabilized in titanium dioxide (TiO 2 ) films, a commonly known dielectric that is widely used in semiconductor technologies, by reducing thickness to <3 nanometers. Importantly, this ferroelectricity persists down to 1-nanometer thickness, approximately twice the unit-cell dimension. This thickness-dependent dielectric-to-ferroelectric phase transition demonstrates that an otherwise centrosymmetric, nonferroic fluorite-structure oxide can undergo structural inversion-symmetry breaking and exhibit voltage-switchable polarization. Atomic layer deposition–based low-temperature (<400°C) synthesis and the stability of this ferroelectricity on both silicon (Si) and amorphous surfaces [such as amorphous silicon dioxide (SiO 2 ) and amorphous carbon films] demonstrate the feasibility of integration with a large variety of materials.