1 December 2020 in Journal of Geotechnical and Geoenvironmental Engineering
Glacial tills are widespread across North America, northern and central Asia, and northern Europe, where they are also found under the Baltic, North, and Norwegian Seas. Their geological and geotechnical characterization is important to a wide range of onshore and offshore engineering projects. One aspect of tills on which little has been reported is their mechanical anisotropy. This paper reports coordinated hollow cylinder apparatus (HCA) tests, triaxial shearing, and small-strain stress probing experiments, supported by index testing, on high-quality samples of natural low-to-medium plasticity, high overconsolidation ratios (OCR) stiff clay-till from the Bolders Bank Formation at Cowden, near Hull in the UK. Material variability and sampling bias are inevitably introduced by the till’s erratic gravel particles and fissure systems, and these aspects are addressed carefully. The experiments investigated the till’s stiffness and shear strength anisotropy from its limited linear elastic range up to ultimate failure, showing that stiffnesses are higher in the horizontal direction than in the vertical and that higher undrained shear strengths develop under passive horizontal loading than active vertical loading. Comparisons are made between the till’s patterns of anisotropy and those applying to previously studied sediments, and reference is made to in situ stiffness measurements. The important implications of anisotropic behavior for geotechnical design and the interpretation of field tests are emphasized.
1 May 2024 in Géotechnique
Low- to medium-density chalk at St Nicholas at Wade, UK, is characterised by intensive testing to inform the interpretation of axial and lateral tests on driven piles. The chalk destructures when taken to large strains, especially under dynamic loading, leading to remarkably high pore pressures beneath penetrating cone penetration testing and driven pile tips, weak putty annuli around their shafts and degraded responses in full-displacement pressure-meter tests. Laboratory tests on carefully formed specimens explore the chalk's unstable structure and markedly time- and rate-dependent mechanical behaviour. A clear hierarchy is found between profiles of peak strength with depth of Brazilian tension, drained and undrained triaxial and direct simple shear tests conducted from in situ stress conditions. Highly instrumented triaxial tests reveal the chalk's unusual effective stress paths, markedly brittle failure behaviour from small strains and the effects of consolidating to higher than in situ stresses. The chalk's mainly sub-vertical jointing and micro-fissuring lead to properties depending on specimen scale, with in situ mass stiffnesses falling significantly below high-quality laboratory measurements and vertical Young's moduli exceeding horizontal stiffnesses. While compressive strength and stiffness appear relatively insensitive to effective stress levels, consolidation to higher pressures closes micro-fissures, increases stiffness and reduces anisotropy.
1 May 2024 in Géotechnique
Low-to-medium-density chalk can be destructured to soft putty by high-pressure compression, dynamic impact or large-strain repetitive shearing. These process all occur during pile driving and affect subsequent static and cyclic load-carrying capacities. This paper reports undrained triaxial experiments on destructured chalk, which show distinctly time-dependent behaviour as well as highly non-linear stiffness, well-defined phase transformation and stable ultimate critical states under monotonic loading. The chalk's response to high-level undrained cyclic loading invokes both contractive and dilative phases that lead to pore pressure build-up, leftward effective stress path drift, permanent strain accumulation, cyclic stiffness losses and increasing damping ratios that resemble those of silts. These outcomes are relatively insensitive to consolidation pressures and are distinctly different to those of the parent intact chalk. The maximum number of cycles that can be sustained under given combinations of mean and cyclic stresses are expressed in an interactive stress diagram which also identifies conditions under which cycling has no deleterious effect. Empirical correlations are proposed to predict the number of cycles to failure and mean effective stress drift trends under the most critical cyclic conditions. Specimens that survive long-term cycling present higher post-cyclic stiffnesses and shear strengths than equivalent ‘virgin’ specimens.
1 May 2024 in Géotechnique
Comprehensive field investigations into the axial cyclic loading behaviour of open steel pipe piles driven and aged in low-to-medium-density chalk identify the conditions under which behaviour is stable, unstable or metastable. Post-cycling monotonic tests confirmed that stable cycling enhanced pile capacity marginally, while unstable cases suffered potentially large losses of shaft capacity. Metastable conditions led to intermediate outcomes. The patterns by which axial deflections grew under cyclic loading varied systematically with the normalised loading parameters and could be captured by simple fitting expressions. Cyclic stiffnesses also varied with loading conditions, with the highest operational shear stiffnesses falling far below the in situ seismic test values. The monotonic and cyclic axial responses of the test piles were controlled by the behaviour of, and conditions within, the reconsolidated, de-structured, chalk putty annuli formed around pile shafts during driving. Fibre-optic strain gauges identified progressive failure from the pile tip upwards. Large factors of safety were required for piles to survive repetitive loading under high-level, two-way conditions involving low mean loads, while low-amplitude one-way cycling had little impact. A simple ‘global’ prediction procedure employing interface shear and cyclic triaxial tests is shown to provide broadly representative predictions for field behaviour.
1 May 2024 in Géotechnique
This paper reports the cyclic behaviour of chalk, which has yet to be studied comprehensively. Multiple undrained high-resolution cyclic triaxial experiments on low- to medium-density intact chalk, along with index and monotonic reference tests, define the conditions under which either thousands of cycles could be applied without any deleterious effect, or failure could be provoked under specified numbers of cycles. Intact chalk's response is shown to differ from that of most saturated soils tested under comparable conditions. While chalk can be reduced to putty by severe two-way displacement-controlled cycling, its behaviour proved stable and nearly linear visco-elastic over much of the one-way, stress-controlled loading space examined, with stiffness improving over thousands of cycles, without loss of undrained shear strength. However, in cases where cyclic failure occurred, the specimens showed little sign of cyclic damage before cracking and movements on discontinuities led to sharp pore pressure reductions, non-uniform displacements and the onset of brittle collapse. Chalk's behaviour resembles the fatigue response of metals, concretes and rocks, where micro-shearing or cracking initiates on imperfections that generate stress concentrations; the experiments identify the key features that must be captured in any representative cyclic loading model.
1 March 2023 in International Journal of Geomechanics
Tetrapod piled jacket (TPJ) foundations that support offshore wind turbines (OWTs) tend to be subjected to significant torque that is caused by eccentric loading from wind, waves, or accidental vessel impact. This paper presented a comprehensive three-dimensional (3D) numerical analysis to investigate TPJs performance under torsional loading, which considered the distribution of local torque and rotation over pile shafts and the underlying torsional load transfer mechanism. A modified Mohr–Coulomb (MMC) model for dense sands was implemented in ABAQUS/Standard that captured the evolution of the friction and dilation (ψ) angles against the accumulated plastic shear strain (γp). The results showed that the torque that was imposed at the head of a TPJ foundation could trigger soil reactions of torsional resistance (τs) and horizontal force (Hp) in individual piles; higher pile spacing-to-diameter ratios (S/D) mitigated the influence of torsional loads. A pressure-dependent torsional load transfer model was proposed that considered the effects of the pile–sand relative stiffness and sand’s relative density (DR). The model could be employed to predict TPJs response under torsional loading and improve their practical design.