25 August 2023 in Laser & Photonics Reviews
3 August 2023 in Optics Letters
Here, we propose a thermally stable and high-reflectivity Ni/Rh/Ni/Au p-type electrode for AlGaN-based deep-ultraviolet (DUV) flip-chip light-emitting diodes (FCLEDs). We discover that the reflectance of Ni/Au electrode deteriorated significantly after rapid thermal annealing. Experiments show that Ni and Au agglomerate at high temperatures, and more incident photons traverse the gaps between the agglomerates, leading to a decrease in reflectance of Ni/Au after annealing. In contrast, the proposed Ni/Rh/Ni/Au p-type electrode shows remarkable thermal stability as a result of the suppression of Ni agglomeration by the Rh layer at high temperatures. Besides, due to the higher reflectivity of the Ni/Rh/Ni/Au electrode and its lower specific contact resistivity formed with p-GaN, the external quantum efficiency and wall-plug efficiency of a DUV FCLED with Ni/Rh/Ni/Au electrode are increased by 13.94% and 17.30% in comparison with the one with Ni/Au electrode at an injection current of 100 mA. The Ni/Rh/Ni/Au electrode effectively solves the long-standing dilemma of efficiency degradation of DUV FCLEDs with a Ni/Au electrode after high-temperature annealing.
24 January 2024 in ACS Applied Materials & Interfaces
3 February 2024 in Physica Status Solidi (RRL) – Rapid Research Letters
8 August 2023 in Optics Letters
Here, we propose nanoimprinted patterned sapphire with a silica array (PSSA) with the aim to promote the efficiency of InGaN-based green (∼520 nm) mini-LEDs. According to x-ray diffraction measurements, the threading dislocation density of GaN epitaxial layers grown on nanoimprinted PSSA demonstrates a pronounced reduction compared with the epilayers on the conventional patterned sapphire substrate (PSS). Consequently, a mini-LED on PSSA exhibits a significantly boosted light output power (LOP) in comparison to a mini-LED on PSS. At 10 mA, the LOP of the mini-LED on PSS is 6.0 mW, and this is further improved to 6.8 mW for the mini-LED on PSSA. Moreover, the peak external quantum efficiencies of the mini-LEDs on PSS and PSSA are 41% and 47%, respectively. A three-dimensional (3D) finite-difference time-domain simulation demonstrates that the PSSA contributes enhanced light extraction for photons emitted from the active region. It is also highly feasible to use this nanoimprinted PSSA technology in red and blue mini-LEDs for the realization of full-color displays.
15 May 2023 in Applied Physics Letters
The implementation of reflective p-type Ohmic contact is an effective way to solve current crowding and improve the optoelectronic performance of flip-chip light-emitting diodes (FCLEDs). Here, we investigate the effects of annealing temperature, annealing time, and N2 flow rate on the formation for Ag/p-GaN Ohmic contact and determine the optimal annealing process parameters. After inserting an indium-tin oxide layer between Ag and p-GaN, the specific contact resistance decreases from 6.66 × 10−3 to 1.86 × 10−3 Ω cm2. In addition, we discover the appearance of a “black line” around the edges of the chips after high-temperature annealing. Finite element analysis and experiments show that the “black line” is related to Ag agglomeration under high temperatures due to stress concentration at the edges of the chips. A strategy for manipulating the stress concentration by adjusting the thickness of the TiW diffusion barrier layer is proposed based on insight obtained by modeling the stress distribution at the edge of the chips. The electrical properties of the fabricated FCLEDs show that the proposed stress manipulation strategy solves the problem of “black line” effectively and maintains the performance of the chips well.