In order to study the high-cycle and very-high-cycle fatigue (VHCF) performance of aero-engine blade materials under conditions close to their real service, an in situ fatigue performance testing apparatus for materials under coupling conditions of high-temperature and combined mechanical loads (HTCMFTA) has been developed. The main functions of the apparatus include: static loads loading, ultrasonic fatigue (up to 20 kHz) loading, high-temperature field (up to 1100 °C) building, and in situ monitoring. A series of tests on the compressor blade material Ti-6Al-4V alloy under coupling conditions of high temperature and combined mechanical loads were carried out with the apparatus. The results show that the apparatus can accurately simulate various mechanical loads and high-temperature fields to which the blade materials are subjected. The static and dynamic mechanical properties of Ti-6Al-4V alloy under high-temperature and combined mechanical loads were also revealed. The results show that there is a synergistic effect between tension and bending; as the pretension stress increases, the bending stiffness and bending-bearing capacity of Ti-6Al-4V alloy were enhanced. A coupling effect exists between temperature, tension, and bending. Under the combined loads, the bending stiffness of Ti-6Al-4V alloy slightly weakened with the increase of temperature, but the bending-bearing capacity increased significantly. This apparatus has important practical significance and scientific value for studying the high-cycle and VHCF performance of aero-engine blade materials and ensuring its service safety.
9 May 2022 in IEEE Transactions on Instrumentation and Measurement
Ti-6Al-4V and Incol 718 alloys are widely used to manufacture aero-engine compressor blades, which are subjected to high-temperature and hybrid tensile–flexural loads in service. This study presents a novel measurement method to obtain composite deformation of materials under coupling of high-temperature and hybrid tensile–flexural loads, aiming to investigate the effects of tension, flexural, and temperature on the composite deformation of the above two materials. The effects of tensile load, flexural load, and temperature on the composite deformation of Ti-6Al-4V alloy and Incol 718 alloy were systematically analyzed by the established measurement method and experiments. The theoretical analysis results are in good agreement with the experimental data, and the maximum relative error of the two is less than 5%. The study found that the composite deformation resistance of the material increases with the increase in tensile load and decreases with the increase in temperature. It is worth noting that when the tensile load is properly applied, the influence of high temperature on the composite deformation resistance of the material is significantly weakened or even disappeared. The measurement method is useful to reveal the coupling effect between tension, flexural, and high temperature on the mechanical properties of the material.
10 February 2023 in International Journal of Fatigue