Romain Lallement

Romain Lallement

Auto-generated profile, based on publicly available information

Romain Lallement

IBM Thomas J. Watson Research Ctr. (United States)

Research Focus & Metrics

Representative Publications

View All Publications
26 May 2022
Verified
Conference Paper
Closed access
PDF file
MBMartin Burkhardt
Martin Burkhardt
ZCZheng G. Chen
Zheng G. Chen
SHScott Halle
Scott Halle
RLRomain J. Lallement
Romain J. Lallement
SSStuart A. Sieg
Stuart A. Sieg
LMLuciana Meli
Luciana Meli
Background: In EUV lithography, the absorber material determines the amplitude and phase of the diffracted orders, which define best focus (BF) and depth of focus (DOF). Control of BF and DOF is needed for mid and high numerical aperture (NA) systems. Aim: Generate recommendations for EUV absorber classes and explain the best focus shifts that occur for bright and dark field mask imaging. Approach: We anchor simulations with experiments using a TaBN absorber, then investigate the BF and DOF for various absorbers using simulation. We use a simple analytical model to show that the analytically predicted diffraction orders behave similarly in magnitude and phase to EMF simulations. Results: We find good prediction for BF experiments and simulations using a very simple resist model, and fair prediction in DOF. We explain the BF shift depending on simple absorber parameters using an analytical model. The exact BF shift needs to be calculated using EMF simulations. Conclusions: Best focus shifts are more pronounced for dark than clear field masks, and more so in attPSM materials than in more binary absorbers. Magnitude and phase of the 0th order plays an important role in BF shifts. We are encouraged to explore low-reflection attPSM materials as mask absorbers.

1 July 2020 in Journal of Micro/Nanolithography, MEMS, and MOEMS
Verified
Journal Article
Closed access
PDF file
JCJennifer Church
Jennifer Church
LMLuciana Meli
Luciana Meli
JGJing Guo
Jing Guo
MBMartin Burkhardt
Martin Burkhardt
CMChris A. Mack
Chris A. Mack
NFNelson M. Felix
Nelson M. Felix
<!-- *** Custom HTML *** --> Background: With aggressive scaling of single-expose (SE) extreme ultraviolet (EUV) lithography to the sub-7-nm node, stochastic variations play a prominent role in defining the lithographic process window (PW). Fluctuations in photon shot noise, absorption, and subsequent chemical reactions can lead to stochastic failure, directly impacting electrical yield. Aim: Fundamental characterization of the mode and magnitude of these variations is required to define the threshold for failure. Approach: A complementary series of techniques is enlisted to probe the nature and modulation of stochastic variation in SE EUV patterning. Unbiased line edge roughness (LER), local critical dimension uniformity (LCDU), and defect inspection techniques are employed to monitor the frequency of stochastic variations leading to failures in line/space (L/S) and via patterning. Results: When characterizing different resists and illumination conditions, there is no change in unbiased LER or via LCDU with increasing critical dimension (CD). Stochastic defect density is correlated with CD for both L/S and via arrays, and there is a strong correlation with L/S electrical yield data. Conclusions: Traditional 3σ LER and via LCDU measurements are not sensitive enough to define and improve PW. For PW centering and yield improvement, stochastic defect inspection is a necessity.

17 November 2021
Verified
Conference Paper
Closed access
JCJennifer Church
Jennifer Church
GJGraham Jensen
Graham Jensen
RLRomain Lallement
Romain Lallement
ACAndrew Cross
Andrew Cross
LMLuciana Meli
Luciana Meli
EUV materials and processes are constantly evolving and maturing, making sub-30nm pitch single-exposure yield feasible. In this paper, the link between LER and stochastic defectivity is explored at a deeper level, as we probe the possibility of nucleating stochastic failures with programmed LER structures at 30 nm pitch using CDSEM, optical inspection and electrical yield data. First, we characterize LER post-develop and post-etch using unbiased LER measurements. Second, we study the defectivity and optical characteristics of programmed LER pattern post hard mask open using optical inspection. Finally, this data is compared to electrical yield to understand yield as a function of LER and defectivity.

12 November 2024
Verified
Conference Paper
Closed access
PDF file
HKHenry H. Kamberian
Henry H. Kamberian
JRJed Rankin
Jed Rankin
JBJinju Beineke
Jinju Beineke
RLRomain Lallement
Romain Lallement
MGMichael Green
Michael Green
CPChris Progler
Chris Progler
Industry has made significant progress advancing EUV Lithography technology for the past several years leading to its full adoption starting at N7 node and volume production through N3 node. To extend EUVL technology well into sub-2nm node regime and beyond, a new High NA EUV platform (Hi-NA) is needed and will be introduced. These new Hi-NA scanner platforms will use anamorphic optics with 0.55NA with EUV illumination incidence angle lower from current scanners arriving light of 6° incidence. At mask level, the combination of EUV light at oblique incidence, absorber thickness, and non-uniform mirror reflectance through incidence angle, creates mask-induced imaging aberrations, known as mask 3D effects (M3D). Additionally, these Hi-NA systems introduce mask related imaging complications such as non-telecentricity, which has shown to cause H-V bias due to shadowing, pattern shift through focus, and image contrast loss due to apodization by the reflective mask coatings. All these factors suggest a need for novel EUV mask absorbers, which will reduce these effects. Of the various novel materials, the low refractive index (low-n) absorber materials, characterized as EUVPSM, have received most attention and acceptance. EUVPSM promises to address mask 3D effects while improving wafer image quality with enhanced contrast. In this work, we have embarked on characterization studies to evaluate a EUV low-n absorber material (EUVPSM), which meets EUV mask fabrication requirements for impending 2nm and below advanced semiconductor device nodes. While a number of low-n materials were considered, through simulation and material evaluation the selection was narrowed to one material, which met thickness, PSM phase angle, and EUV reflectivity targets. Characterization consisted of studying mask manufacturing modules including patterning, post-exposure processing, cleaning, defect inspection and repair. In this study, the material was evaluated for critical patterning performance looking at key CD control metrics such as resolution, uniformity, linearity, proximity and LER/LWR. We also characterized pattern fidelity looking at complex mask designs for 2nm node class and beyond using internally developed advanced mask characterization and optimization methodology emphasizing 2D pattern characterization, including sidewall angle (SWA) assessment of patterned absorber and resultant imaging. Another module studied is the EUV Black-Border patterning process which must improve to meet tightening dimensional, placement and EUV reflectivity controls needed for the Hi-NA regime, especially to enable half-field stitching requirements. With a mask manufacturing process established and characterized, EUVPSM mask lithographic performance was evaluated both to validate the simulation models, and to assess overall EUV printability at Low-NA, where the lithography process and tools are more established. Additionally, an early assessment at Hi-NA conditions is planned to examine critical imaging metrics while comparing the EUVPSM to standard Ta-based binary mask absorber, including early assessment of BB process on both mask and wafer.

28 April 2023
Verified
Conference Paper
Closed access
PDF file
RLRomain J. Lallement
Romain J. Lallement
DSDaniel Schmidt
Daniel Schmidt
RJRichard Johnson
Richard Johnson
JWJack Wong
Jack Wong
CCChristopher Carr
Christopher Carr
AGAllen Gabor
Allen Gabor
In an earlier publication, we evaluated simulation methods to explore overlay performance implications when a highNumerical Aperture (high-NA) Extreme Ultra Violet (EUV) exposure is mixed and matched with a 0.33NA EUV full field exposure. The present contribution goes beyond the method description and aims to quantify the overlay performance impact in such a mix and match case, giving insight into the influence of different sets of overlay corrections. To this aim, the Mont Carlo engine has been updated to accommodate overlay corrections with up to 57 parameters. Since high-NA EUV is not yet available, typical overlay correction terms from IBM’s 0.33NA EUV tool have been used to approximate a realistic image placement error fingerprint for our simulations. As a result, we demonstrate the benefit of various overlay correction sets, and the detrimental effect when using different masks for top and bottom half fields. Such information can also help to infer design layout placement decisions to avoid hot spot regions.

13 June 2022
Verified
Conference Paper
Open access
RLRomain Lallement
Romain Lallement
JMJaime Morillo
Jaime Morillo
DSDaniel F Schmidt
Daniel F Schmidt
RJRick Johnson
Rick Johnson
CMCody Murray
Cody Murray
AGAllen Gabor
Allen Gabor
SPIE Digital Library Proceedings