Technological advances in the digital camera industry and computing resources make the use of photogrammetry a very fast, low-cost, contactless and non-destructive technique. It can represent a good alternative to obtain 3D information for monitoring and conservation of cultural heritage assets, especially where it is not possible to use 3D laser scanners and also in situations where areas to be inspected are not easily accessible [1]. Resolution generally depends on the number of images, their quality and the level of overlap between them, as well as hardware and software capabilities. Starting from 2D aerial or terrestrial photographic images, photogrammetry allows to reconstruct a 3D model in the form of a "point cloud" and also to derive accurate 3D measurements of large architectural elements.This paper is about stereo-photogrammetric scanning by drone performed by MENCI software s.r.l. aimed at the definition of the state of conservation of the “Bridge of the Towers” in Spoleto and its long term preservation without building scaffoldings. It was performed within the RoMA (Resilience enhancement of a Metropolitan Area) project, through an agreement between the “Italian National Agency for New Technologies, Energy and Sustainable Economic Development” (ENEA) and the “Italian Ministry of Cultural Heritage and Activities” (MIBACT).Photogrammetric scanning and FE modelling were applied within the project together with many other monitoring techniques in order to assess the bridge cracks pattern and its structural health by a multidisciplinary approach that allows their mutual validation [2].As one of the most important problems in the use of photogrammetric 3D reconstruction is the considerable demand in terms of hardware and software resources for images processing and data storage, thanks to the HPC (High Performance Computing) resources provided by the CRESCO infrastructure (Research Computational Centre on Complex Systems), it was possible to analyse and process a large amount of high-resolution photos in order to detect the crack pattern and to assess the actual damage state to be monitored over time [3].
Historical monuments in the urban environment are affected by anthropic vibrations, therefore the health monitoring of those structures is mandatory. The frequency domain analysis is the standard procedure to infer the presence of damages, but usually it requires expensive equipment, time consuming elaborations, trained personnel. Moreover, especially if the monument to be investigated is a large building, many devices are necessary. In order to face all these difficulties, we propose the recently developed motion magnification methodology. It is based on a processing procedure that plays the role of a microscope for slight motions within a video. In recent years, experimental studies explored this methodology applied to simple geometries, demonstrating its potentialities and reliability thorough comparison with conventional and accurate vibration instruments, such as accelerometers and lasers. However, the study of large ancient monuments is lacking. Our case-study, the so-called Temple of Minerva Medica located between the railway tracks and a tramway in the center of Rome, intends to fill the gap.