14 October 2020 in IEEE Antennas and Wireless Propagation Letters
A wideband, low-profile, vertically polarized antenna with monopole like radiation characteristics is proposed for 4G/5G indoor base station applications. The design of this antenna is based on the traditional monocone antenna with internal matching and reactive load. The structure of monocone is realized by crossed substrate, which reduces the antenna weight and improves the design flexibility simultaneously. Then, reactive loading of capacitively coupled triangle patches and shorting pins are used to reduce the height of antenna profile to 0.08λ min , where λ min is the free-space wavelength at the lowest operation frequency. An interdigital capacitor is etched near the antenna's input to adjust the impedance matching. The proposed antenna demonstrates consistent monopolelike, omnidirectional radiation patterns within the operating band. A measured impedance bandwidth for voltage standing-wave ratio (VSWR) <; 2.2 of about 81% ranging from 1.66 to 3.95 GHz is achieved, which covers 1.7-2.7 GHz 4G Long-Term Evolution band and 3.3-3.8 GHz 5G N78 band simultaneously. The proposed antenna is tailored for the ceiling micro base station in indoor distributed system.
1 March 2021 in IEEE Transactions on Antennas and Propagation
A novel low-profile dual-polarized omnidirectional antenna is proposed in this communication, which is designed for 1.7-2.7 GHz LTE band operation. The horizontally polarized (HP) omnidirectional radiation is realized by a circular slot array. Eight stepped-impedance slots are fed by a 1-to-8 T-junction power divider with equal amplitudes and phases. On the other hand, the vertically polarized (VP) omnidirectional radiation is realized by using the characteristics of the TM0n mode of the cylindrical cavity, where eight shorting copper sheet are used to excite TM01 and TM02 modes. A 1-to-4 T-junction power divider is used to feed the VP unit and achieve good impedance matching. The HP antenna is used to replace the top metal disk of the VP antenna unit, and eight slots are etched on the ground of the vertical polarization unit. It substantially solves the problem of matching deterioration when the horizontal polarization antenna is placed close to the ground. Besides, a special feeding method is employed to avoid the feeding intersection, which commonly appears in dual-polarized antennas. The antenna achieves an isolation around 35 dB and it has a low-profile of 0.07λmin, with λmin being the free space wavelength at the lowest operation frequency. The proposed antenna has an omnidirectional beam, which is very suitable for indoor ceiling base station applications.
26 January 2021 in IEEE Antennas and Wireless Propagation Letters
A novel low-profile antenna with monopole-like radiation characteristics is proposed for 4G/5G indoor micro ceiling base station applications. The proposed antenna consists of a top loading disk, two polygonal copper sheets which are orthogonally intersected, and a circular printed circuit board which serves as the ground. A prototype is fabricated and measured. The proposed antenna has a very low profile of 0.057 $\lambda_{\text min}$ , where $\lambda_{\text min}$ is the free space wavelength at the lowest frequency of the operating band. A fractional bandwidth of 85.3% ranging from 1.6 GHz to 3.98 GHz with |S11| <- 10 dB is achieved which covers the 4G LTE band and 5G N78 band. The proposed antenna demonstrates consistent monopole-like radiation pattern in the whole working band, which is very suitable and well designed for indoor ceiling base station applications.
8 September 2021 in IEEE Antennas and Wireless Propagation Letters
A novel dual-band circularly polarized (CP) shared-aperture antenna is proposed in this letter. The overall structure consists of a substrate-integrated waveguide (SIW) slot antenna working in the X -band, which also serves as the top patch of a C -band microstrip-like antenna. The SIW slot antenna achieves CP radiation by etching a circular slot on the top surface of a dual-mode SIW cavity. The patch antenna realizes CP radiation by loading two pairs of asymmetric shorting vias. With this design method, the proposed antenna can achieve dual-band CP operation and high aperture reuse efficiency. Besides, the feeding pin of the SIW slot antenna inserts through one of the asymmetric shorting vias, that is, the shorting vias serves as both perturbations for the C -band operation and a feeding path for the X -band operation. This new feeding scheme can prevent signal crosstalk between the two bands.
7 December 2020 in IEEE Antennas and Wireless Propagation Letters
A novel low-profile vertically polarized wideband monopole antenna is proposed. A central-fed circular patch antenna which is shorted concentrically by three metal pins is initially adopted to excite TM01 and TM02 modes. Then, a fan-shaped clearance area is cut out in the angular area between each two shorting pins. Finally, three mushroom-like structures are placed in the clearance area, which, together with the feeding probe, form three split ring resonators that introduce an extra resonance, thereby substantially expanding the antenna operation bandwidth. All the three modes have radiation patterns similar to the conventional monopole. The proposed antenna has a very low profile of 0.06 $λ_\text{min}$ and a lateral dimension of π × (0.176 $λ_\text{min}$ ) $^2$ , where $λ_\text{min}$ is the free space wavelength at the lowest frequency of operation. A simulated impedance bandwidth for |S $_\text{11}$ | <-10 dB of about 48.5% ranging from 1.7 to 2.79 GHz is achieved, which fully covers the 4G LTE band, while the measured result shows a wider fractional bandwidth of 66%.
4 January 2021 in IEEE Access
In this study, a three-port vertically polarized Quasi-Yagi Multiple-Input-Multiple-Output (MIMO) antenna system with pattern diversity is proposed for 5G N78 band application. All the three ports, which are sequentially rotated by 120°, are integrated together on a circle patch. Each antenna element is fed by a probe and an annular slot etched on the patch which works as a capacitor to counteract the inductance effect introduced by the feeding probe and the nearby shorting posts. A patch-like broadside radiation pattern is generated for each element. By introducing a novel $\Gamma $ -shaped metal plate for each element, the radiation beam could be tilted and deviate from the z axis by around +30° to suit the diversity application demand. Good isolation is achieved by introducing a metal post between every two ports, which well suppresses the mutual coupling induced by the current between the ports. The working principle of the proposed MIMO antenna is theoretically illustrated in detail and experimentally verified. The Proposed antenna occupies a cylindrical volume of $\pi \times 0.33^{2} \times 0.14\,\,\lambda _{0}^{3}$ , where $\lambda _{0}$ represents the free space wavelength at the center frequency of the operating band. The measured overlapping bandwidth covers the N78 band (3.3-3.8 GHz) with $\vert \text{S}_{11}\vert < -10$ dB for the three antenna elements. The proposed antenna offers attractive features including a shared radiation aperture, pattern diversity, good isolation ( $\le20$ dB) good gain ( $\ge8.2$ dBi), low field envelope correlation coefficient value ( $\le0.001$ ), and high radiation efficiency ( $\ge74$ %).