23 May 2022 in Advances in Materials Science and Engineering
Ulva prolifera marine seaweed was tested for its capacity to eliminate reactive orange 16 (RO16) from aqueous solutions. Algae has recently been regarded as one of the most environmental friendly wastewater treatment methods and resources. The batch study used variations in solution pH, sorbent dosage, initial dye concentration, and temperature. The biochar was characterized using Fourier transform infrared (FT-IR) spectroscopy, an elemental analyser, proximate analysis, and a BET analyser. The adsorption mechanism was further investigated using adsorption isotherm and kinetic models. The thermodynamic analysis was performed by varying temperatures at different dye concentrations and calculating thermodynamic parameters such as Gibbs free energy, enthalpy, and entropy. The study was performed to evaluate the sorbents performance in real-time wastewater treatment, a variety of chemicals, solid-liquid ratios, and regeneration cycles that were used to determine desorption efficiency.
16 June 2021 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
Marine seaweed is considered as one of the efficient tools for the mitigation of carbon dioxide and it is naturally overgrown in India. Biochar produced from seaweeds will remediate the toxic pollutants present in the soil and wastewater. The current investigation examined the potential of biochar synthesized from Ulva reticulata for the decolorization of Remazol Brilliant Orange 3 R (RBO3R). An up-flow-packed bed column is designed to check the feasibility of the effluent treatment in a real wastewater system. The partition coefficient was calculated to elucidate the optimal initial RBO3R concentration that has the highest affinity toward the biochar and the column operating parameters namely sorbent bed depth, flowrate and the initial RBO3R concentration were also studied. To validate the experimental data mathematical models namely the modified dose-response model (MDR) and Yoon Nelson model (YN) were developed. The results concluded that the removal efficiency of 69.08% and sorption capacity of 0.1046 mmol/g was obtained. The biochar potential has been assessed by conducting three sorptions and an elution cycle continuously using 0.01 M sodium hydroxide as the elutant.
1 March 2016 in Desalination and Water Treatment
Selection of an appropriate coagulant for removal of chemical oxygen demand (COD) and turbidity from wastewater generated in a pharmaceutical industry was demonstrated. The standard jar test procedure was adopted to determine the optimum pH and coagulant dosage needed for enhanced COD and turbidity removal. Alum and bentonite (montmorillonite) were chosen as coagulant and coagulant aid, respectively. Based on the results obtained from experiments, COD removal (CODRE, %) and turbidity removal (TRE, %) were optimized using response surface methodology. Under the optimum conditions, the model predicted a CODRE of 67% and TRE of 90% and CODRE of 55% and TRE of 70% using alum (coagulant dosage = 0.79 g/L, pH 5.91) and bentonite (coagulant dosage = 0.58 g/L, pH 5.61), respectively. Confirmatory experiments conducted on the optimized condition showed experimental findings within 5% of the projected values. Though alum resulted in higher CODRE and TRE as compared to bentonite, bentonite can have the advantage of being environmentally benign when compared to the conventionally used coagulant, alum.
15 October 2020 in Energy Sources, Part A: Recovery, Utilization, and Environmental Effects
The present research explored the potential of a freshwater algae Pithophora cleveana Wittrock and Mimusops elengi leaves in the removal of lead in batch experiments. The operating parameters like contact time, pH of a solution, biosorbent dosage, particle size of biosorbent, initial concentration, and temperature were determined. A maximum uptake of 22.96 and 14.54 mg/g was reported for Pithophora cleveana Wittrock and Mimusops elengi with a maximum removal efficiency of 94.89% and 85.67%. Langmuir Isotherm model predicted a maximum correlation coefficient of 0.999 and 0.985 for Pithophora cleveana Wittrock and Mimusops eleng biosorbents. The kinetic study concluded that the pseudo-second-order kinetic model was found to best fit with a correlation coefficient always not less than 0.995. The thermodynamic study concluded that the biosorption mechanism was exothermic and spontaneous.
1 January 2022 in Journal of Nanomaterials
The elimination of Reactive Red 120 (RR120) from synthetic solution using biochar generated from Ulva prolifera was investigated. The process parameters sorbent dose (A), pH (B), initial dye concentration (C), and temperatures (D) were optimized using response surface methodology (RSM). To estimate the removal effectiveness of dye with the best 27 trails, the Box‐Behnken method (blocked) was utilised. Analysis of variance (ANOVA), main effect plot, interaction plot, and surface plot were used to establish the significance of the model, and the confidence level of the model was set at 95%. To maximise the objective, the RSM optimizer was utilised with a desirability of 1. Furthermore, the batch investigation was supplemented by isotherm models, kinetic models, and thermodynamic analyses to understand the adsorption mechanism.
27 November 2020 in Biomass Conversion and Biorefinery