4 August 2022 in IEEE Transactions on Industrial Informatics
Sensorless control is an effective measure to improve reliability and reduce cost for the brushless dc motor (BLDCM). However, the performance is generally related to the cost and complexity of the system, making it difficult for engineering applications. Therefore, this article proposes a high-dynamic and low-cost sensorless control method for high-speed BLDCMs using the rich built-in resources of the digital signal processor. First, a variable relating to the commutation moment is constructed and detected, which is not affected by modulation noise. Then, a detailed commutation process is presented based on the relationship between the back electromotive force (back-EMF) integral and the commutation point. Moreover, an integral prediction method is proposed by linearizing the back-EMF to cope with the effect of discrete sampling on commutation accuracy. Finally, experimental tests are performed on a magnetically suspended control moment gyroscope, which verifies the effectiveness of the proposed high-dynamic and low-cost sensorless control method.
20 September 2021 in IEEE Transactions on Industrial Informatics
Accurate commutation is a key factor to ensure the ideal electrical torque performance and high motor efficiency for position sensorless brushless dc motor. In order to eliminate the commutation error, this article presents a closed-loop correction method using the hardware-based floating phase back electromotive force (EMF) integration. First, the relationship between the floating phase back-EMF integral and commutation error is analyzed. Then, based on the relationship, a closed-loop controller fed by the integral is introduced to generate the angle to correct the commutation point. But the inaccurate integral calculation resulted from insufficient sampled point at high motor speed will seriously reduce the correction accuracy. For this reason, a novel hardware configuration is designed to transform the back-EMF integral into a filtered analog voltage. In this way, the integral can be obtained precisely from sampling the analog voltage with low sampling rate. Thus, a precise commutation is achieved by the closed-loop control, especially in the high speed range. Finally, experimental results on a magnetically suspended turbo molecular pump show the effectiveness of the proposed method.
7 April 2021 in IEEE Transactions on Industrial Electronics
Accurate commutation point is essential to ensure the ideal torque performance and low power consumption for brushless DC (BLDC) motor. In order to achieve the precise sensorless commutation at a constant or the rapidly varying speed, a fast commutation error correction method is proposed in this article. First, it is pointed out that the controlled variable variation, the high rate of commutation error relative to the low speed and the nonlinearity of the correction loop are the main origins of commutation error when the speed varies rapidly. Then, a novel commutation error correction method is proposed through the following three aspects: first, constructing a controlled variable first utilized for commutation correction, which keeps constant at the rapidly varying speed; second, incorporating feedforward compensation for the phase shift caused by low-pass filter; third, using feedback linearization to reduce the nonlinearity of the correction loop. The proposed commutation error correction method not only corrects the commutation error fast at a constant speed, but also achieves precise commutation when the rotor speed changes rapidly. Moreover, the proposed method is based on the principle of closed-loop control, thus, it also has the advantage of anti-interference. At last, the experimental results are shown to validate the effectiveness of the proposed method.
17 March 2021 in IEEE Transactions on Power Electronics
This article focuses on the sensorless commutation strategy of brushless DC (BLDC) motor with three-phase nonideal asymmetric back-EMFs (NAEMFs). To improve the torque performance and reduce power consumption, this article addresses two key issues: pointing out the accurate commutation positions of the BLDC motor with NAEMFs and proposing a novel closed-loop commutation error compensation strategy to obtain the accurate commutation positions. First, the accurate commutation positions are proved from the relationship between electromagnetical torque curve and commutation error on polar coordinates. Then, the novel feedback network and sampling subsystem are utilized to sample the back-EMFs of floating phases before and after the commutation positions separately. The deviation of the sampled voltages is employed as the controlled variable. Based on the controlled variable, the parallel control loops are incorporated to correct commutation positions in real time. When the controlled variable converges to zero, the commutation error is compensated synchronously. The proposed closed-loop compensation strategy utilizes any two back-EMFs of the BLDC motor, which can compensate the commutation error from the hardware and software. Furthermore, the commutation error induced by the asymmetric back-EMFs can also be eliminated. At last, the experimental results presented in this article validate the effectiveness of the proposed strategy.
19 June 2023 in IEEE/ASME Transactions on Mechatronics
Commutation error is a crucial factor that reduces the efficiency of brushless dc (BLdc) motors. This article presents a commutation point optimization method for a sensorless BLdc motor. First, the sources of commutation error under position sensorless control are analyzed, and a conclusion is drawn that the phase difference between the back electromotive force vector and phase current vector equals the total commutation error. Second, a fundamental waveform extractor is used to eliminate the influence of harmonics on the equivalent commutation error. Third, the phase difference of the fundamental waveforms is extracted by a combined phase-locked loop, and the real-time commutation error is obtained consequently. Finally, accurate commutation is achieved by compensating for the phase difference, and experimental results on a reaction flywheel prototype evaluate the presented method.
4 October 2023 in IEEE Transactions on Industrial Informatics
Position sensorless control of brushless dc motor has been an effective measure for size reduction and reliability improvement. However, the commutation error remains a significant factor limiting the motor operating efficiency. Therefore, a phase synchronization-based commutation error correction method is proposed in this article. First, the primary commutation error sources are analyzed, and the conventional commutation error correction methods are compared. Then, a commutation error construction and correction method is investigated to overcome the problem that the commutation accuracy is affected by noise interference and motor inductance in the conventional methods. By implementing the developed closed-loop correction system, desired commutation error correction performance is achieved. Finally, experiments are carried out for the effectiveness validation of the proposed method.