31 May 2018 in Journal of Industrial Textiles
Protection is obligatory for the safety of people in certain occupations where they might be exposed to hazardous chemicals. This review provides an overview of chemical protective clothing, along with its necessity during industrial and military operations as well as in response to acts of terror. Moreover, chemical protective or barrier suits are illustrated and explained including their types, selection processes based on chemical hazards, working environments, and various materials available for the fabrication of effective barrier clothing. Additionally, this review elucidates current research gaps, while underscoring the challenges facing recently developed chemical protective clothing, by compiling relevant research onto a single platform. Besides, this review includes and delineates future trends in chemical protective outfits based on electro-spun nano-fibre technology involved in both detection and decomposition of poisonous chemical agents that come in contact with clothing material, and the integration of selectively permeable membrane technology to discriminately block hazardous chemicals.
1 January 2016 in Journal of Cleaner Production
1 April 2014 in Chemical and Materials Engineering
Conventional dyeing process of cotton fabric with reactive dyes requires the use of large amount of electrolyte as exhausting agent. Thus the discharged wastewater from dye house creates unavoidable environmental threats due to very high salt concentration. This paper presents the possibility of salt free dyeing of cotton fabric with reactive dye by treating the fabric with chitosan. Exhaustion of dye by the fabrics was increased by treating them with chitosan prior to dyeing. It has been noticed that absorption of dye has significantly increased with the increment of chitosan concentration. The K/S value, i.e. dye absorption of chitosan treated fabrics was found as 1.6, 1.7, 2.2 and 2.9 respectively for 1%, 2%, 3% and 4% chitosan concentration whereas the K/S value of untreated fabric was 1.9. Fastness of the dyed samples had also been investigated through color fastness to washing, perspiration and rubbing. No fastness deterioration had been experienced for the dyed fabric treated with chitosan. However in case of chitosan treatment at high concentration, the wet rubbing fastness was found slightly inferior to untreated dyed samples which can be explained as the consequence of higher depth of shade due to high absorption of dyestuff by the fabric.
1 February 2014 in Chemical and Materials Engineering
The paper discusses the thermophysiological comfort of a newly developed fabric potentially for firefighter’s protective clothing. The fabrics were developed by incorporating super hydrophobic silica aerogel nanoparticles in 65/35 wool-Aramid blended fabric. Then the theromophysiological comfort was analyzed by determining air, moisture and heat transfer performance. It has been found that only 2% coating of aerogel nanoparticle increases thermal resistance by up to 68.64% and can reduce air permeability by up to 45.46% whereas 4% aerogel coating can reduce 61.76% air permeability. Moisture management properties of the aerogel coated fabric have also been investigated and discussed in details. In brief, it can be said that the thickener that was used for the coating, has a positive impact on moisture transportation and overall moisture management property of the fabric. Again aerogel coated next-to-skin layer and aerogel coated outer layer acted differently on the same fabric. It was observed that, the coated fabric acts as more likely as a moisture management fabric when the coating was applied on next-to-skin surface.
7 February 2018 in Clothing and Textiles Research Journal
Phase change material (PCM) in firefighting garment enhances protection and comfort. Wearing a protective clothing containing PCM, while fighting the fire, is a direct risk to the wearer as most PCMs used are flammable. This article reports a solution by using aerogel. Thermal liner fabric was treated with PCM and/or aerogel and then their thermal properties were analyzed. It has been found that the mean ignition time of PCM-containing thermal liner is around 3.3 s in current case while this value significantly increased to 5.5 s when the combination of aerogel and PCM was used. Moreover, the weight of the liner fabric with aerogel decreased in comparison to PCM-containing liner. Aerogel also slowed down the spreading of flame in PCM-containing fabric. Aerogel–coated liner showed superior heat resistance and the combination of aerogel with PCM increased the thermal resistance of PCM-containing liner.
2 June 2018 in Journal of Sol-Gel Science and Technology