A new compact MOSFET model based on artificial neural network (ANN) is developed for analog circuit simulation. MOSFETs with various widths and lengths are fabricated using 0.18- $\mu \text{m}$ analog process. With the novel preprocessing of the measured drain voltage and current data, a high-precision ANN model covering the whole drain current range is developed. By adopting the Latin hypercube sampling algorithm, the amount of data required for training can be significantly reduced without apparently degrading the fitting result. The result shows that the ANN model has a better fitting capability than the BSIM4 model which is the state-of-the-art model in 0.18- $\mu \text{m}$ analog process. For the transconductance and output resistance simulation, the ANN model also has a higher precision. The amplifier and low-dropout regulator (LDO) built by the ANN model are revealed to have good convergence in dc simulation, indicating that the ANN model has a great potential for analog circuits simulation.
This paper reports ultralow contact resistivities (ρ c ) achieved on highly doped p-SiGe with two low-temperature contact formation methods. One method combines precontact amorphization implantation with ~500 °C rapid thermal processing (RTP)-based Ti germano-silicidation; ρ c achieved was ~2.9 × 10 -9 Ω·cm 2 . The other method combines codeposited TiSi-Ti:Si = 1:1-with ~450 °C RTP-based Ti silicidation; ρ c achieved was ~1.7 × 10 -9 Ω·cm 2 . When Pc reaches minimum, the TiSi(Ge) alloy is generally amorphous with embedded small crystallites, similar to the previous observations on pure Si substrates.
In this letter, we investigate contacts of a low work function rare-earth metal, La, and its silicides on n-Si. LaSi x /n - -Si contacts show low Schottky barrier height (φ b ) of around 0.25-0.4 eV and promisingly low contact resistivity (ρ c ) on moderately doped n + -Si. However, on highly doped n ++ -Si, we find Pc of LaSi x near one order higher than the TiSi x control. This experiment indicates that low φ b does not guarantee low Pc on highly doped substrates. We further discuss reasons behind this phenomenon.
A robust process for Au-free ohmic contact formation is demonstrated by a direct contact of TixAly alloy film on non-recessed i-AlGaN/GaN. Using this novel TixAly alloy instead of multilayers as contact metals, an ultra-low contact resistivity of < 0.1 Ω·mm is achieved for Ti5Al1 alloy on i-AlGaN/GaN after 880 oC/60s annealing.