1 November 2022 in IEEE Transactions on Industry Applications
The flywheel energy storage system (FESS) is a short-time high-power energy storage technology widely used in various fields. To improve speed and reduce air friction loss, the rotor of the high-speed permanent magnet synchronous machine (HSPMSM) used in FESS operates at a magnetic suspension state in vacuum. It is very difficult for the rotor to dissipate heat, which may even lead to PM demagnetization. In this paper, a 200 kW 20000 r/min HSPMSM is designed for FESS of an uninterruptible power supply (UPS), and a composite PM rotor with multilayer sleeves is proposed. Distinct from the previously proposed retaining sleeve design of the HSPMSM rotor, a silicon steel sleeve is added in the composite PM rotor, which can provide a bypass for alternating flux density harmonic components in the rotor and prevent them from entering the alloy sleeve and PM. Moreover, a post-processing method of finite-element analysis (FEA) results is proposed to obtain the alternating harmonic components in the rotor and further analyze the suppression effect of the silicon steel sleeve on them. As the silicon steel sleeve is introduced, the amplitudes of alternating harmonic components are effectively suppressed, which can mitigate the eddy current loss and heat generation of the HSPMSM rotor from the source.
5 December 2022 in IEEE Transactions on Energy Conversion
The flywheel energy storage system (FESS) has high-power density and fast response speed, hence it is widely used as a pulse power supply. For the high-speed permanent magnet synchronous machine (HSPMSM) used in high-power FESS, there are two technical problems that need to be solved, including huge centrifugal forces of the rotor at a high-speed operation region and large phase currents at a low-speed operation region. In this paper, a 5 MW high-speed interior PMSM (HSIPMSM) is designed for FESS. The design goal of this electric machine is to reduce the maximum phase current at the lowest speed as much as possible while ensuring the rotor mechanical strength. Based on the response surface (RS) model and non-dominated sorting genetic algorithm II (NSGA-II), the multiobjective design of the HSIPMSM is accomplished using 29 groups of multiphysical field finite element analysis (FEA) sampling experiments. The computational cost is effectively reduced. In addition, the constant power optimal trajectory and control switching speed of the HSIPMSM are analyzed and discussed, and the reason that the constant power flux weakening region of the designed HSIPMSM is not wide and the maximum torque per ampere (MTPA) mode is adopted at a low-speed operation region is further illustrated.