Irina Sokolovska

Irina Sokolovska

Auto-generated profile, based on publicly available information

Irina Sokolovska

Institute of General Energy of the National Academy of Sciences of Ukraine

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 June 2023 in Energy Technologies & Resource Saving
Verified
Journal Article
Open access
PDF file
VDVolodymyr Derii
Volodymyr Derii
OTO.I. Teslenko
O.I. Teslenko
ISI.S. Sokolovska
I.S. Sokolovska
The results of the estimation of the annual potential for thermal energy production using heat pumps (HPs) in district heating systems (DHS) for the regions of Ukraine and the country as a whole are given. This study is relevant due to the high level of DHS development in Ukraine, which reaches 52 %. Today, the outdated equipment of DHSs in Ukraine needs significant technological modernization. Also, in the near future, it will be necessary to restore DHSs destroyed as a result of the total destruction of the civil infrastructure by the russian aggressor. The post-war reconstruction of Ukrainian cities has a unique chance to radically update DHSs using renewable energy sources and innovative technologies, including HPs. The authors propose a new methodical approach for the regional determination of the forecast implementation scope of HPs in DHSs. Using this approach, the economically available energy potential of thermal energy production by HPs in DHSs from various low-potential heat sources (LPHS) was determined, both for the regions of Ukraine and for the country as a whole. As of 2020, this energy potential for DHSs of Ukraine is 62.601 million Gcal/year (262.1 PJ/year): 22.2 % is provided by natural LPHS (heat of air (2.2 %), river water (16.9 %), ground and groundwater (3.1 %)) and 77.8 % is provided by anthropogenic LPHS (heat of ventilation emissions of buildings connected to the DHS (43.0%), sewage water (9.7 %), flue gases from boilers and combined heat power plants (14.3 %), cooling water of technological processes (10.8 %)). The calculated energy potentials for the thermal energy production by HPs from various LPHSs for DHSs of 24 regions of Ukraine are presented also. Information from scientific publications, regulatory documents, annual reports of the State Statistical Service of Ukraine and other government agencies used as the initial data for calculations. Approved methods of heat engineering calculations, methods of statistical and calculation-comparative analysis using Microsoft Excel computer software used to calculate and visualize the results. Methodical recommendations for determining the priority and locations for the implementation of HPs in regional DHSs of Ukraine, which developed by the authors of the article, are presented. Bibl. 48, Fig. 2, Tab. 4.

27 December 2022 in System Research in Energy
Verified
Journal Article
Closed access
VDVolodymyr Derii
Volodymyr Derii
ISIrina Sokolovska
Irina Sokolovska
OTOleksandr Teslenko
Oleksandr Teslenko
Methodology and calculation formulas are proposed for estimating the thermal potential and its distribution by the regions of Ukraine for natural and artificial (anthropogenic) low-grade heat sources: ambient air, ventilation emissions of buildings connected to district heating systems, soils and groundwater, large rivers, wastewater, waste heat of boilers and CHPs, and industrial waste heat. The availability of thermal potential of these sources for heat pump plants of district heating systems has been determined. Annual heat potential and average annual capacity were estimated for each of these sources. It is shown that the annual heat potential and average annual capacity available for heat pump plants in district heating systems are: 9,735 thous. Gcal and 905 MW for ambient air; 25,655 thous. Gcal and 1,871 MW for ventilation emissions of buildings; 2,628 thous. Gcal and 87 MW for soil and groundwater; 3,212 thous. Gcal and 299 MW for large rivers; 4,545 thous. Gcal and 338 MW for wastewater; 2,459 thous. Gcal and 724 MW for waste heat of boilers and CHPs; 7,661 thous. Gcal and 214 MW for industrial waste heat, respectively. The total thermal potential of the above-mentioned sources is 4.97 GW which enables the use of heat pump plants in district heating systems with a total capacity of about 7.5 GW. In the case of heat pump plants using low grade heat sources of natural origin, it must be taken into account that their intensive use can lead to their rapid thermal exhaustion and a significant impact on the environment. Therefore, it is necessary to maintain such level of energy use of natural low grade heat sources that would enable their exploitation without harming the environment. In the conditions of densely built-up cities of Ukraine, the use of heat of the soil and groundwater for heat pump plants will be limited due to the shortage of free land plots. It will also be problematic to use powerful air heat pump plants in populated areas due to their high noise level. Keywords: heat pump plant, district heating systems, low grade heat source, thermal potential

20 December 2023 in Energy Technologies & Resource Saving
Verified
Journal Article
Open access
PDF file
VZV.A. Zhovtyansky
V.A. Zhovtyansky
ODO.M. Dudnyk
O.M. Dudnyk
MOM.V. Ostapchuk
M.V. Ostapchuk
ISI.S. Sokolovska
I.S. Sokolovska
The state of development of plasma gasification technologies of carbon-containing raw materials in Ukraine is analyzed. It is shown that despite some pessimistic domestic assessments of the prospects for their development, the state of research and development in this field at the global level indicates the inevitable breakthrough directions for the development of such technologies and, first of all, in the field of hydrogen energy. In particular, this concerns the prospects of using such difficult-to-process raw materials for hydrogen production as, for example, sewage sludge or worn automobile tires. This will create an additional powerful effect from their implementation, bearing in mind the solution of complex environmental problems of modern Ukraine. The experimental part of this work is devoted to the study of the prospects of such processing, using the example of a laboratory version of a plasma chemical reactor, made according to the scheme of the process of inverted gasification of solid organic raw materials with the introduction of a plasma jet into the pyrolysis zone. The output of hydrogen depended on the raw material: the lowest one was from sewage sludge pellets, and the highest one was from rubber crumb of worn automobile tires; in the case of gasification of a mixture of sewage sludge pellets and rubber crumb, an intermediate value of this indicator was observed. It is important that the output of hydrogen was determined not so much by its content in the raw material, but by the reactivity of the latter, which also corresponded to the degree of use of water vapor. The level of reactivity determined the degree of use of water vapor in the case of pellets up to 29 %, and rubber crumb up to 56 % and, accordingly, the chemical efficiency of gasification reached 39 % and 55 %. It follows from the results of the research that in the conditions of relatively low temperatures in the experimental reactor, the mixing of pellets of sewage sludge and rubber crumb does not create a synergistic effect of advantages regarding the energy efficiency of the process. Bibl. 58, Fig. 4, Tab. 4.

22 May 2022 in The Problems of General Energy
Verified
Journal Article
Open access
VDVolodymyr Derii
Volodymyr Derii
ISI.S. Sokolovska
I.S. Sokolovska
OTO.I. Teslenko
O.I. Teslenko
The use of low grade heat sources by heat pump plants in heat supply systems in developed European countries is considered. It is established that process waters, natural reservoirs, ventilation emissions of buildings, sea water, heat of refrigeration units, groundwater, flue gases of boilers and thermal power plants, wastewater, heat of solar energy batteries, geothermal heat are used as low grade heat sources for heat pump plants. It is shown that for heat pump plants of district heating systems in Ukraine it is most expedient to use the heat of: ventilation emissions of buildings connected to these systems, wastewater, soils and groundwater, air, flue gases of boilers and CHP, rivers, process water, emissions and discharges of industrial enterprises. Exhaust ventilation heat of supermarkets, shopping malls and subways will be used not for district heating systems, but for the own needs of these organizations. The use of the heat of soils and groundwater will not be widely used in district heating systems due to the density of urban buildings Keywords: low grade heat source, district heating systems, thermal energy, heat pump

23 September 2021 in The Problems of General Energy
Verified
Journal Article
Closed access
VDVolodymyr Derii
Volodymyr Derii
ISI.S. Sokolovska
I.S. Sokolovska
OTO.I. Teslenko
O.I. Teslenko
Trends in the use of heat pumps in district heating systems (DHS) of European countries and their prospects in Ukraine are considered. It is established that special programs have been created to stimulate heat pumps introduction in many countries around the world in order to reduce the consumption of fossil fuels for heat supply purposes. The production of heat pumps in EU countries is regulated by the relevant Directives and Commission Regulations (EU). Ukraine is actively working to harmonize these documents, improving and adapting Ukrainian legislation to European one. There is no unified approach to regulate the introduction and use of heat pumps in the world. Each country has its own regulations with appropriate permits and restrictions. The construction of heat pump systems requires certain permits from the relevant agencies, both at the state and regional (local) levels. During the operation of powerful heat pumps, their productivity and consumption of energy of low-potential heat source are monitored. The use of electricity in all sectors of the world economy will develop at a rapid pace. In 2050, electrification will take a leading position in the production of DHS thermal energy in Ukraine that will lead to mass use of heat pumps. The total heat capacity of the installed heat pumps will increase over the next thirty years and will reach 6.3 GW in 2050 that will provide an annual production of 14.8 million Gcal of thermal energy. The role of heat pumps in DHS will be as follows: generation of thermal energy during the heating period, centralized hot water supply and cold supply in summer, daily regulation of electric load of power systems. Keywords: district heating systems, thermal energy, heat pump, electric boiler, generation structure, electric load

1 July 2024 in System Research in Energy
Verified
Journal Article
Closed access
VDVolodymyr Derii
Volodymyr Derii
OTOleksandr Teslenko
Oleksandr Teslenko
ISIrina Sokolovska
Irina Sokolovska
The use of powerful industrial heat pumps (HP) is a fairly effective means of rational and environmentally friendly use of energy resources both in individual households and in district heating (DH), as well as in production processes in various industries. Powerful HPs are used in Ukraine much less than in developed European countries. In fact, these are isolated cases. The post-war reconstruction of destroyed cities with their district heating systems gives Ukraine a unique chance to use modern energy-efficient technologies, including HP. As a result, efficiency will improve and DH competitiveness will increase due to the low cost of thermal energy for consumers. Almost all developed countries of the world have government financial support for the HP implementation. The purpose of this study is to determine the level and form of government financial support for projects to implement HP in DHs of Ukraine. Financial modeling of the implementation of heat pump plants shown that they are more expediently to be used in the mode of generating thermal energy than in the mode of regulating the electric load of power systems. It is shown that the projects of heat pump plants, which use the heat of flue gases as a source of low-potential heat (LPH), are the most economically attractive and practically do not require government financial support. Projects of heat pump plants, which use air, ventilation emissions, waste water, soil and groundwater, sea, rivers, and waste heat of technological processes as LPH, are not financially attractive without government financial support, and some of them are even unprofitable. The most appropriate comprehensive financial support is tax incentives and interest compensation on the loan. Sensitivity analysis showed that projects for the implementation of heat pump plants may be the most sensitive to the amount of generated thermal energy, the price of natural gas and electricity. Keywords: heat pumps, low-potential heat sources, district heating, financial obstacles, tax incentives, grants.