We propose a classification scheme for nocturnal atmospheric boundary layers and apply it to investigate the spatio‐temporal structure of air temperature and wind speed in a shallow valley during the Shallow Cold Pool Experiment. This field campaign was the first to collect spatially continuous temperature and wind information at high resolution (1 s, 0.25 m) using the distributed temperature sensing technique across a 220 m long transect at three heights (0.5, 1.0, 2.0 m). The night‐time classification scheme was motivated by a surface energy balance and used a combination of static stability, wind regime and longwave radiative forcing as quantities to determine physically meaningful boundary‐layer regimes. Out of all potential combinations of these three quantities, 14 night‐time classes contained observations, of which we selected three for detailed analysis and comparison.The three classes represent a transition from mechanical to radiative forcing. The first night class represents conditions with strong dynamic forcing caused by locally induced lee turbulence dominating near‐surface temperatures across the shallow valley. The second night class was a concurrence of enhanced dynamic mixing due to significant winds at the valley shoulders and cold‐air pooling at the bottom of the shallow valley as a result of strong radiative cooling. The third night class was characteristic of weak winds eliminating the impact of mechanical mixing but emphasizing the formation and pooling of cold air at the valley bottom.The proposed night‐time classification scheme was found to sort the experimental data into physically meaningful regimes of surface flow and transport. It is suitable to stratify short‐ and long‐term experimental data for ensemble averaging and to identify case studies.
1 April 2020 in Atmospheric Measurement Techniques
The weak-wind boundary layer is characterized by turbulent and submesoscale motions that break the assumptions necessary for using traditional eddy covariance observations such as horizontal homogeneity and stationarity, motivating the need for an observational system that allows spatially resolving measurements of atmospheric flows near the surface. Fiber-optic distributed sensing (FODS) potentially opens the door to observing a wide range of atmospheric processes on a spatially distributed basis and to date has been used to resolve the turbulent fields of air temperature and wind speed on scales of seconds and decimeters. Here we report on progress developing a FODS technique for observing spatially distributed wind direction. We affixed microstructures shaped as cones to actively heated fiber-optic cables with opposing orientations to impose directionally sensitive convective heat fluxes from the fiber-optic cable to the air, leading to a difference in sensed temperature that depends on the wind direction. We demonstrate the behavior of a range of microstructure parameters including aspect ratio, spacing, and size and develop a simple deterministic model to explain the temperature differences as a function of wind speed. The mechanism behind the directionally sensitive heat loss is explored using computational fluid dynamics simulations and infrared images of the cone-fiber system. While the results presented here are only relevant for observing wind direction along one dimension, it is an important step towards the ultimate goal of a full three-dimensional, distributed flow sensor.
In the stable boundary layer, thermal submesofronts (TSFs) are detected during the Shallow Cold Pool experiment in the Colorado plains, Colorado, USA in 2012. The topography induces TSFs by forming two different air layers converging on the valley-side wall while being stacked vertically above the valley bottom. The warm-air layer is mechanically generated by lee turbulence that consistently elevates near-surface temperatures, while the cold-air layer is thermodynamically driven by radiative cooling and the corresponding cold-air drainage decreases near-surface temperatures. The semi-stationary TSFs can only be detected, tracked, and investigated in detail when using fibre-optic distributed sensing (FODS), as point observations miss TSFs most of the time. Neither the occurrence of TSFs nor the characteristics of each air layer are connected to a specific wind or thermal regime. However, each air layer is characterized by a specific relationship between the wind speed and the friction velocity. Accordingly, a single threshold separating different flow regimes within the boundary layer is an oversimplification, especially during the occurrence of TSFs. No local forcings or their combination could predict the occurrence of TSFs except that they are less likely to occur during stronger near-surface or synoptic-scale flow. While classical conceptualizations and techniques of the boundary layer fail in describing the formation of TSFs, the use of spatially continuous data obtained from FODS provide new insights. Future studies need to incorporate spatially continuous data in the horizontal and vertical planes, in addition to classic sensor networks of sonic anemometry and thermohygrometers to fully characterize and describe boundary-layer phenomena.
The NY-Ålesund TurbulencE Fiber Optic eXperiment (NYTEFOX) was a field experiment at the Ny-Ålesund Arctic site (78.9∘ N, 11.9∘ E) and yielded a unique meteorological data set. These data describe the distribution of heat, airflows, and exchange in the Arctic boundary layer for a period of 14 d from 26 February to 10 March 2020. NYTEFOX is the first field experiment to investigate the heterogeneity of airflow and its transport of temperature, wind, and kinetic energy in the Arctic environment using the fiber-optic distributed sensing (FODS) technique for horizontal and vertical observations. FODS air temperature and wind speed were observed at a spatial resolution of 0.127 m and a temporal resolution of 9 s along a 700 m horizontal array at 1 m above ground level (a.g.l.) and along three 7 m vertical profiles. Ancillary data were collected from three sonic anemometers and an acoustic profiler (minisodar; sodar is an acronym for “sound detection and ranging”) yielding turbulent flow statistics and vertical profiles in the lowest 300 m a.g.l., respectively. The observations from this field campaign are publicly available on Zenodo (https://doi.org/10.5281/zenodo.4756836, Huss et al., 2021 ) and supplement the meteorological data set operationally collected by the Baseline Surface Radiation Network (BSRN) at Ny-Ålesund, Svalbard.
Nocturnal variations of temperature and wind are examined at three contrasting sites. After the early evening period of rapid cooling, the magnitude of the variations of temperature on a time scale of 10 min to an hour often become larger than the corresponding temperature change due to the nocturnal trend. These shorter-term temperature variations are forced by wave-like motions and more complex modes. Observations from a network of stations across a shallow valley at one of the sites are analyzed in more detail. Typically, decreasing wind speed corresponds to less mixing and lower temperature at the surface followed by increasing wind speed, increased mixing, and higher temperatures. The flow may continue to switch back and forth between these two states for much of the night. These non-stationary motions interact with motions induced by the gentle local topography, leading to intermittent local drainage flows, transient cold pools, and both propagating and semi-stationary microfronts.