24 July 2026 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Parallel mechanism with sub-closed-loops is advantaged on compensating the nonlinear motions of carrier satellite due to their hybrid driving units. However, since the space Earth observation camera operates in a microgravity environment, higher requirements are placed on jerk characteristics and trajectory planning of spaceborne stable platform. In this paper, a kind of spaceborne stable platform with sub-closed-loops and a method for studying its jerk and trajectory planning are proposed. First, a 3-(RRPRP) RS mechanism is obtained based on the displacement manifold synthesis method, and its mechanism characteristics are analyzed. Besides, by applying the generalized jerk screws of sub-closed-loop unit, a general method for jerk analysis of such kind mechanism in non-inertial frame is proposed. Furthermore, the trajectory planning of stable platform is carried out with the goal of minimizing the jerk weighted square sum of drive joints and moving platform by using 7-order quasi-uniform B-spline curves and L-SHADE algorithm. Finally, taking 3-(RRPRP) RS mechanism and 6-UPS PM as numerical example, the proposed method is verified by comparing the results of theoretical calculation, simulation and experiment.
11 February 2023 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Casting sand mold with five-axis linkage high speed machining has the characteristics of high feeding speed, small milling force, fast tool axis swing speed and big contour error. The coupling relationships among tool axis swing, following error and contour error were analyzed, the computing method of axis movement speed for five-axis linkage machining was proposed, and a rapid linear estimation model of contour error for casting sand mold with five-axis linkage machining was established. On this basis, according to the relationships between rotary axis speed and tool axis swing speed, a look ahead self-adaptive control method of contour error for casting sand mold with five-axis linkage high speed machining was proposed, and an experiment of impeller sand mold with five-axis linkage machining was carried out. The results show that the contour error formed by tool tip can be estimated rapidly according to the tool axis swing speed in the process of casting sand mold with five-axis linkage high speed machining, and the proposed look ahead control of the rotary axis speed is an effective method for contour precision of casting sand mold with five-axis linkage high speed machining.