Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
Auto-generated profile, based on publicly available information
Jiangtao Wu
Key Laboratory of Thermo-Fluid Science and Engineering, Ministry of Education, School of Energy and Power Engineering, Xi’an Jiaotong University, Xi’an 710049, China
A thermodynamic property formulation for dimethyl ether has been developed based on a selection of experimental thermodynamic property data. The formulation includes a fundamental equation, a vapor-pressure equation, and saturated-density equations for liquid and vapor states. In determining the coefficients of the equation of state, multiproperty fitting methods were used that included single-phase pressure-density-temperature , heat capacity, vapor pressure, and saturated density data. Deviations between experimental and calculated data are generally within the experimental accuracy. The equation of state has been developed to conform to the Maxwell criterion for two-phase liquid-vapor equilibrium states, and is valid for temperatures from the triple-point temperature to , with pressures up to and densities up to . The uncertainties of the equation of state in density are 0.1% for the liquid phase and 0.3% for the vapor phase. In the extended critical region, the uncertainties in density are 0.5%, except for very near the critical point. The uncertainties in vapor pressure are 0.2% above , and increase as temperature decreases. The uncertainties in saturated liquid density are 0.05%, except for near the critical point. The uncertainties in heat capacity are 2.0%. Detailed comparisons between the experimental data and calculated values are given.
2 April 2014 in Journal of Chemical & Engineering Data
A thermodynamic property formulation for dimethyl carbonate has been developed with the use of available experimental thermodynamic property data. The equation of state was developed with multiproperty fitting methods involving pressure-density-temperature (pρT), heat capacity, vapor pressure, and saturated-liquid density data. The equation of state conforms to the Maxwell criterion for two-phase liquid-vapor equilibrium states, and is valid for temperatures from the triple-point temperature (277.06 ± 0.63) K to 600 K, for pressures up to 60 MPa, and for densities up to 12.12 mol dm−3. The extrapolation behavior of the equation of state at low and high temperatures and pressures is reasonable. The uncertainties (k = 2, indicating a 95% confidence level) of the equation of state in density are 0.05% for saturated-liquid states below 350 K, rising to 0.1% in the single phase between 278 K and 400 K at pressures up to 60 MPa. Due to the lack of reliable data outside this region, the estimated uncertainties increase to 0.5% to 1% in the vapor and critical regions. The uncertainties in vapor pressure are 0.6% from 310 K to 400 K, and increase to 1% at higher temperatures and to 2% at lower temperatures due to a lack of experimental data. The uncertainty in isobaric heat capacity and speed of sound in the liquid phase at saturation or atmospheric pressure is 0.5% from 280 K to 335 K. The uncertainties are higher for all properties in the critical region. Detailed comparisons between experimental and calculated data, and an analysis of the equation, have been performed.