This paper presents a procedure for designing a mechanical training and rehabilitation gait system centered on ankle trajectories for children with cerebral palsy or any other psycho-motor limitation. With the aim of developing a reconfigurable device adjustable to the anthropometric characteristics of the user, an analytic model for the generation of ankle trajectories was elaborated, taking as a base the experimental data reported in literature. A dimensional synthesis for a mechanism to follow the drop type trajectories was carried out as a constrained numerical optimization problem that was solved with both the mathematical programming method and an evolutive algorithm, sequential quadratic programming (SQP) and differential evolution (DE), respectively. The comparative analysis of the results from both methods for this case study shows that DE outperforms SQP because of the limited feasibility space derived from the problem constrains and boundaries. The best result from DE was simulated with a computer-aided design package using a real size model for manufacturing.
In this paper, a graph-theory-based approach for representing planar mechanisms is presented, the Santiago Portilla method (SPM). From the corresponding adjacency matrix, SPM generates an extended matrix containing the complete characterization of a planar mechanism, including all the information about both topology and geometry. This matrix representation can be used for the optimal design of mechanisms, allowing simultaneously the topological and dimensional synthesis by means of computational tools such as the metaheuristic algorithms. A case study corresponding to the design of a fixed-linear-trajectory tracker mechanism is included in order to test the efficiency of the proposed approach. It was carried out by addressing the design as an optimization problem and solving it with the differential evolution algorithm, representing the individuals in its population by the matrix form generated by the SPM. The results of the case study show that the SPM and its matrix representation constitute a useful and flexible tool for the solution of the real engineering problems involving the design of planar mechanisms.
There are problems that are difficult to solve through mathematical programming or by classical methods. These problems are called hard problems due to their high complexity or high dimension. On the other hand, mataheuristics intends to seek a better solution to a problem. The Improvement Harmony Search algorithm is proposed under modification of the bandwidth parameter increasing the quality of the exploitation of the solutions. That is why within the state of the art, are mentioned several versions of harmonic search. The state of the art is supports the fact that the algorithm belongs to the category of those who make modifications to its parameters. This research demonstrates the ability of ImHS to solve a problem of high complexity focused on solving four-bar mechanism designs, whose solutions imply high dimension and which are also classified as hard problems. The two problems that are solved in this investigation, are problems very attacked within the state of the art by various metaheuristics. A comparison is then made against previous solutions with traditional metaheuristics and other versions of harmony search algorithm. Finally, the effectiveness of performance is demonstrated, where proposed algorithm it exceeded five metaheuristic algorithms and five harmony search versions. An optimum is provided in an easy and useful way, the parametric statistics are improved and the number of feasible solutions is exceeded in NP-hard problems as in the case of problems with four-bar mechanisms.
Hybrid metaheuristics, explored in recent literature, are optimization methods that combine a global search metaheuristic with algorithms for refinement that in turn can be stochastic or deterministic. Although initially they were applied to combinatorial optimization, nowadays there are hybrid algorithms for a wide range of numerical problems: static or dynamic, mono or multi-objective, unconstrained or constrained, among others. In this paper a novel application of a hybrid method, MemMABC, is applied as a tool in a case study for the synthesis of an end effector presented as a constrained optimization problem, using a model for a two-finger gripper. The objective is to show the ability of hybrid metaheuristics as an alternative method for solving hard problems, specifically of numerical optimization. MemMABC is a memetic algorithm, that uses the modified artificial bee colony algorithm(MABC) for global searching and a version of random walk as local searcher, adapted to handle design constraints with an ε-constraint scheme. Grippers are end effectors used in a wide variety of robots, and are a good example of hard optimization problems. The simulation of results shows an accurate control of the gripping force along the opening range of the calculated mechanisms, suggesting that MemMABC can produce quality solutions for real-world engineering cases.
In this paper, an alternative approach for topology optimization of truss-type structures is presented. The structural design is translated to a constrained discrete optimization problem based on weight reduction, with performance considerations included in its objective function. The constraints are related to the maximum global stress and to the individual strain energy density. Each member has a standard profile and its absence/presence in the structural representation is implemented with a binary coding; in order to avoid singularities while in the structural analysis, a scheme for simulating the effects of missing members by means of the birth/death element technique is applied. An energy-based approach is employed to detect those elements that not contribute to the overall stiffness. The optimization problem is solved by applying a Modified Binary Differential Evolution algorithm, and the graph theory is applied in parallel with the optimization process to discard unfeasible structures and reduce execution time. The structural performance is evaluated by an execution-time static analysis based on the finite-element method, considering the behavior in a 3-D environment and using commercial software to reduce the uncertainty in this step. The presented proposal is implemented in ANSYS APDL, using as case studies two different structures with a specific load case. The obtained results show a volume reduction of more than 40% off the initial structures, indicating that the proposed approach can be a high-quality tool for structural design in real engineering problems.