From 2016 through 2019, NREL completed 30 site assessments at Army facilities to determine appropriate locations and connections for electric vehicle supply equipment. This report summarizes the results of those assessments, and provides examples and lessons learned for other Federal agencies planning to deploy electric vehicles.
This study evaluated the structural integrity of Type III and Type IV CNG fuel tanks from the Los Angeles (LA) County Metropolitan Transportation Authority to characterize the fuel tank conditions after experiencing a full service life of 15 years in transit bus application. The data produced provide insight about the condition of the CNG fuel tanks at the conclusion of their defined EOL and potential risks of continued operation of the CNG vehicle without replacement of the expired fuel tanks. In addition to physical testing performed on the fuel tanks, a nondestructive evaluation of modal acoustic emission (MAE) was utilized to assess the structural integrity of the tanks. The CNG fuel tanks were evaluated in their received condition and after experiencing artificial damage. The MAE results were then compared to visual inspection results of the procedures defined in the Compressed Gas Association’s (CGA’s) C-6.2 and C-6.4 standards (Compressed Gas Association 2013; 2012) to better understand the effectiveness of the visual inspection and potential safety risks of continued use of the tanks.
This study leveraged the partnership between the United States Department of Energy's (DOE) Clean Cities Coalition Network and the Association for the Work Truck Industry (NTEA) to launch a vehicle and fleet analysis project that assisted fleets in identifying opportunities to save energy, improve efficiency, reduce costs, and meet environmental goals via short term data logging and analysis. The National Renewable Energy Laboratory (NREL) sought to establish a process that included initial data acquisition, provided data storage, and developed analytic methods to inform fleets of areas of opportunity based on approximately 30 days of in use vehicle performance data. However, long-term the project will require ongoing funding to fully develop and maintain the data sharing platform and to produce more complex analysis.
The U.S. Department of Transportation (DOT) National Highway Traffic Safety Administration (NHTSA) is considering fuel system integrity requirements for medium- and heavy-duty natural gas and propane vehicles to update Federal Motor Vehicle Safety Standards (FMVSS) Nos. 301, 303, and 304. NHTSA is also considering updates to FMVSS No. 304 to address safety issues and to better reflect current best practices and existing standards for high pressure fuel tanks in motor vehicles. The National Renewable Energy Laboratory (NREL) conducted and attended subject matter expert panel meetings and other meeting types to develop recommendations for fuel system and fuel container integrity requirements for CNG and propane fuel vehicles. In addition, NREL completed a review of FMVSS Nos. 301, 303, and 304 against the latest editions of natural gas and propane international and industry codes and standards for the purposes of identifying commonalities and differing technical approaches as they pertain to natural gas and propane vehicle fuel system and fuel container integrity requirements. In this report, NREL offers recommendations to reflect current best practices and existing standards for light-, medium-, and heavy-duty CNG and propane vehicle fuel system container integrity, fuel container integrity, and fuel container fire tests. The recommendations for fuel systemmore » and fuel container integrity requirements are justified by literature review, relevant research, and technical forum feedback. In addition, this report provides relevant research, where available, and recommends test procedures to evaluate compliance with the performance requirements. The recommendations presented in this report for consideration are 1) update FMVSS to include fuel system integrity assessment of medium- and heavy-duty vehicles; 2) update FMVSS to include fuel system integrity requirements for propane vehicles and tanks; 3) add additional CNG fuel tank integrity tests; and 4) incorporate more repeatable fire test procedure for fuel tank integrity. Detailed recommendations are included in Section VII, and a summary of the line-by-line review of fuel system, fuel container integrity, and fuel container fire test requirements for natural gas and propane vehicles is provided in the appendices. This report also includes an overview of the regulatory landscape for natural gas and propane vehicles that was reviewed. « less