8 November 2024 in Environmental Science & Technology
1 January 2016 in Journal of Chemistry
The adsorption of Cr(III) or Cr(VI) in the absence and presence of Cu(II) onto kaolin was investigated under pH 2.0–7.0. Results indicated that the adsorption rate was not necessarily proportional to the adsorption capacity. The solutions’ pH values played a key role in kaolin zeta potential, especially the hydrolysis behavior and saturation index of heavy metal ions. In the presence of Cu(II),reached the maximum adsorption capacity of 0.73 mg·g−1at pH 6.0, while the maximum adsorption capacity for the mixed Cr(VI) and Cu(II) system () was observed at pH 2.0 (0.38 mg·g−1). Comparing the adsorption behaviors and mechanisms, we found that kaolin prefers to adsorb hydrolyzed products of Cr(III) instead of Cr3+ion, while adsorption sites of kaolin surface were occupied primarily by Cu(II) through surface complexation, leading to Cu(II) inhibited Cr(VI) adsorption. Moreover, Cr(III) and Cr(VI) removal efficiency had a positive correlation with distribution coefficient. Cr(III) and Cr(VI) removal efficiency had a positive correlation with distribution coefficientand that of adsorption affinities of Cr(III) or Cr(VI) on kaolin was found to beCr(III) <Cr(III)-Cu(II) andCr(VI) >Cr(VI)-Cu(II).
20 February 2025 in Environmental Science: Nano
Impurity-containing iron hydroxides, abundant in many natural and engineered soil and aqueous environments, control the fate and transport of multiple aqueous contaminants. Fe(III) hydroxide was reported to simultaneously detoxicate As(III) and Cr(VI). However, the mechanisms and reaction intermediates are not clear, and the effects of impurities in ferrihydrite were far from being well understood. Here, Cr(III)-incorporated Fe(III) hydroxides were precipitated from acidic solutions (pH ∼ 3.0) with varied Fe(III)/Cr(III) molar ratios (10 : 0 to 8 : 2) for simultaneous removal of As(III) and Cr(VI). Multiple characterization techniques were combined to investigate the effects of Cr-incorporation on the size, band gap, adsorption, and catalytic efficiency of Fe hydroxides. With the amounts of Cr-incorporation increasing, the particle size of Fe hydroxides rapidly decreased (from 16.7 to 6.0 nm), and the removal of total As/Cr increased, as the Cr-incorporated Fe hydroxides with smaller size had larger surface area, promoting As/Cr removal by adsorption. Based on As/Cr speciation analysis of both aqueous and solid phases, the molar ratios of the oxidized As(III) (88%) to reduced Cr(VI) (∼56%) were calculated to be ∼1.5, indicating that the coupled redox conversion was the dominant removal mechanism over As(III)/Cr(VI) adsorption and As(III) oxidation. Intermediate characterization and molecular simulation found that Cr-incorporation promoted the early formation of H2O2 and Cr(V) intermediates, and enhanced the adsorption of reaction intermediates on Cr-incorporated Fe hydroxides, thus promoting their catalytic efficiency for coupled As(III)/Cr(VI) redox reactions.