19 August 2020 in IEEE Antennas and Propagation Magazine
27 October 2020 in IEEE Open Journal of Antennas and Propagation
The development of reconfigurable antennas compatible with a CubeSat form factor can aid several space missions. Often, satellite missions require multiple wireless links with the same radio, but the design of such antennas is challenging due to the mechanical constraints and the limited power aboard a CubeSat. In this paper, we present a unique reconfigurable antenna concept enabled by adhesive polyimide tapes. The presented antenna can switch from a conventional patch to a monopole-like antenna with minimal actuation complexity. This reconfiguration provides choices for polarization, pattern, and gain without use of active components for size, cost and power consumption reductions. The frequency of operation is S-band (2.4 GHz), and the antenna achieves S11<-10 for both reconfiguration states. Measurements compare well with simulations in both states.
2 April 2018 in IEEE Transactions on Antennas and Propagation
This paper describes an intuitive approach for synthesizing metal-only, low-profile, high-gain stepped reflector antennas that can aid emerging technologies in the areas of communications and remote sensing. The required reflector aperture is synthesized using a family of confocal parabolic sections, each of which scatters in phase to provide a focused beam in the far field. The parabolic sections provide a distinct advantage over the conventional Fresnel zone plate (FZP) antenna, since the radiation is inherently unidirectional. Furthermore, the metal-only structure avoids the need for dielectric characterization, which is essential for reflectarrays. Using this technique, it is possible to achieve depths of the order of one wavelength while ensuring high efficiencies. Starting from a symmetric stepped reflector synthesis, two distinct approaches to synthesize offset stepped reflectors are explored in this paper. We highlight several interesting tradeoffs between electromagnetic performance and mechanical complexity that arise for each of these approaches. A thorough analysis of the frequency performance of stepped parabolic reflectors is also presented. Comprehensive simulations using both physical optics and multilevel fast multipole method validate our theoretical predictions. The formulations presented in this paper are especially relevant at mmWave frequencies and beyond, which has attracted significant interest for modern technologies.
19 March 2021 in IEEE Open Journal of Antennas and Propagation
Modern phased arrays require large instantaneous bandwidths, wide fields of view, and low profiles to conduct multiple functions. Many of these phased arrays rely on emerging high speed ADCs and advanced balanced transceivers. The benefits of balanced front-ends include improved linearity, dynamic range, isolation, and noise resilience. The application of a differential phased array in such a system removes extraneous losses caused by baluns, though the issue of feed-borne E-plane scan resonances must be considered. We address the E-plane scan resonance issue through an improved Balanced Wideband Impedance Transformer (BWIT) feed for the ultra-wideband (UWB) Tightly Coupled Dipole Array (TCDA). This BWIT feed has already demonstrated mitigated common-modes over a 3:1 bandwidth ratio while scanning to low angles. Here, our differential TCDA (D-TCDA) is developed for the L-C band (viz. 1.0 GHz to 6.1 GHz) with emphasis on resonance-free wide-angle scanning. Rigorous EM model and circuit analysis is included to verify the BWIT performance. Under a VSWR <; 3 definition, the improved array achieves a 6:1 impedance bandwidth ratio (BWR) with resonance-free scanning in all planes. An exception is the H-plane scanning at 60° where the VSWR <; 4. Array simulations are verified with measurements for an 8×8 single-polarized prototype.
6 June 2019 in IEEE Transactions on Antennas and Propagation
This work aims to provide an insight into the appearance of grating lobes when the geometry of an antenna exhibits circular periodicity. Examples of such antennas can be uniform circular arrays or rib-deployable umbrella reflectors. The array factor for a single-ring uniform circular array is first analyzed in depth to estimate the location of the grating lobes in elevation and azimuth directions. Further, simple analytical expressions are derived to estimate the level of the grating lobes that occur nearest to the main beam. We also extend these formulations to predict the behavior of grating lobes when the array elements are arranged in the form of concentric rings, which is more suitable for modeling apertures of antenna that possess circular periodicity.
28 March 2022 in IEEE Transactions on Antennas and Propagation
Low-cost and lightweight CubeSats have opened new possibilities to realize Internet of Space (IoS), a vision that aims to provide global network access, particularly for remote areas. A key challenge for IoS realization is the development of an antenna that can meet the gain, bandwidth, and polarization requirements for IoS while complying with the small form factor of CubeSats. The challenge is further magnified by the need to dynamically reconfigure the antenna’s beam location to maintain connectivity as the satellite orbits. This work addresses these challenges by proposing a beam steerable reflectarray antenna that can potentially be integrated with CubeSats to enable IoS. A novel reflectarray unit cell containing multiple Archimedean spiral arms is designed to support broadband circularly polarized (CP) operation, and its operational principle is discussed in depth. The unit cell provides four states of phase shift that are electronically switchable, allowing the reflectarray to achieve the required aperture phase for the desired beam scan. Representative reflectarray prototypes are designed, fabricated, and measured. CP beam scan up to 60° in the plane of offset across the targeted frequency band of 17.8–20.2 GHz is achieved.