11 January 2019 in Chemical Communications
Lithium dendrite growth remains one of the major hindrances for its practical application. Here, we develop an ultrathin indium sheet to construct a stabilized lithium-rich hybrid anode with fast interfacial ion transport. The artificial alloy layer demonstrates an enhanced ionic conductivity that is an order of magnitude higher than that of the pristine solid electrolyte interphase. With the reduced diffusion barrier and improved charge transfer at the artificial interface, the hybrid anode realizes uniform lithium electrodeposition and considerable dendrite suppression. When coupled with LiNi5Co3Mn2O2 cathodes, this hybrid anode shows impressive reversibility.
27 December 2021 in ACS Applied Materials & Interfaces
25 April 2022 in ACS Applied Materials & Interfaces
9 May 2019 in Chemical Communications
A flake-graphite painted layer (an electron/ion dual-conductive framework) was prepared by a spraying method and the resulting improved interface contact between a lithium–metal anode and garnet electrolyte was demonstrated. Experiments showed that a large decrease in the interface resistance, from 3062 to 40 Ω cm2, was obtained. Besides a long cycling performance, the new interface also endured a tremendous Li volume change of 4.8 μm cm−2 in each stripping/plating step.
3 July 2018 in Journal of the Electrochemical Society
Lithium metal anode has showed the great potential for the next generation batteries because of its impressive advantages (high specific capacity and low potential) against graphite. However, the growth of dendrite has been one of the major challenges for practice implementation, which leads to low Coulombic efficiency and safety concerns. In the development of stable Li metal anode, the current collector is recognized as a critical component to regulate Li plating. Here, one simple and cost-effective strategy for stabilizing the Li anode is reported with the metal foam as the current collector. Due to the plentiful interspaces and robust framework, metal foam exhibits perfect accommodation of deposited Li and contributes to Li cycling (stripping and plating processes) without accumulation on the surface. On this basis, a high capacity density of 5 mAh cm−1 is realized with the effective dendrite suppression. Moreover, a long cycle lifespan of ∼780 h with the low voltage hysteresis around 20 mV is achieved in a symmetrical cell.