The expansion of agriculture in Brazil has led to an increase in waste generation and higher energy demand. This study compares the use of sawdust residues from Eucalyptus grandis W. Hill ex Maiden (EG) and Pinus elliottii Engelm. (PE), combined with residual chicken visceral oil (CVO) from the poultry slaughtering industry, for briquette production. An initial screening, a compaction and stability test, involved producing pure sawdust briquettes under loads of 2.55 to 15.29 MPa to evaluate their post-briquetting integrity. In parallel, raw materials were characterized. The stability tests revealed that EG briquettes maintained their integrity at loads from 5.10 to 15.29 MPa, whereas PE briquettes were only stable at the highest load (15.29 MPa). Consequently, EG was selected for developing composite briquettes. TGA characterization further supported this choice, showing EG has a more favorable two-stage thermal degradation, suggesting more stable combustion than PE’s single-stage profile. As expected, CVO possesses a much higher HHV (40.46 MJ/kg) than the sawdusts. While increasing CVO content boosts the briquette’s energy, a processing limit was identified: oil exudation during pressing. At the maximum tested load of 15.29 MPa, the optimal formulation was found to be 20% CVO. The resulting briquette exhibited a measured HHV of 23.61 MJ/kg, representing an energy increase of over 21% compared to the pure EG briquette.
2 December 2024 in Revista de Gestão Social e Ambiental
Objective: The objective of this research is to analyze the technical, economic, and environmental feasibility of using lignocellulosic residues and grease for the production of briquettes, proposing a model for an industrial plant with a capacity of 26,250 tons per year. Theoretical Framework: The increasing generation of urban and industrial solid waste, such as rice husks, sugarcane bagasse, and residual lubricating oil, represents a significant environmental challenge. Briquetting emerges as a sustainable solution, allowing the reuse of these wastes into energy alternatives that contribute to mitigating environmental impacts and reducing dependence on fossil fuels. Method: The methodology included linear programming using the Generalized Reduced Gradient (GRG) method to optimize the briquette composition, state trees to map technological flowcharts, and heuristic rules to select equipment. Additionally, a preliminary economic analysis based on the Venture Profit criterion was performed. Results and Discussion: The study identified the optimal briquette composition as 75.23% rice husk, 14.57% sugarcane bagasse, 4.16% tree pruning residue, and 6.04% residual lubricating oil. The economic analysis indicated an estimated profit of USD 206,341.23 over 10 years, confirming the economic and environmental feasibility of the enterprise. Research Implications: This study demonstrates that low-value waste can be transformed into products with high energy and economic potential. Future research should focus on optimizing flowcharts and experimentally validating briquettes to ensure their quality and market competitiveness.