4 April 2019 in Materials and Corrosion
Chloride salts are one candidate for a >700°C concentrating solar power (CSP) cycle, however, many reports from the literature suggest very high reaction rates between chloride salts and structural alloys. Historically, a specific methodology was established for evaluating halide salt compatibility based on solution kinetics. This study returned to that paradigm where the salts are purified and evaluated in sealed capsules before moving to a flowing experiment to determine a true corrosion rate in a temperature gradient for a commercial K–Mg–Na chloride salt. Isothermal testing focused on Ni‐based alloys 230 and 600 at 600°C–800°C. The results indicated there were promising combinations of salt chemistry, temperature, and alloy composition that reduce the extent of reaction. The results of the first monometallic thermal convection loop of alloy 600 run for 1,000 hr with a peak temperature of 700°C showed low attack with rates ≤9 µm/yr.
17 October 2018 in Advances in Applied Ceramics: Structural, Functional and Bioceramics
As part of Accident Tolerant Fuel initiative for light water reactors, uranium silicide and silicide-nitride are being considered as fuels that can be combined with a more robust cladding such as a ferritic (FeCrAl) alloy. Although these materials have been studied in the past, uncertainties remain concerning the fundamental behaviour of these systems. In this study, four compositions between U3Si5 and USi2 were fabricated by arc-melting. Additionally, in an effort to understand the UN–U3Si2 fuel system, an unidentified U–Si–N ternary was observed in samples fabricated by arc-melting U3Si2 in the presence of varied concentrations of N2 in Ar. The analyses of compositions prepared to investigate these systems include structural characterisation using X-ray diffraction and compositional analysis employing scanning electron microscopy with energy dispersive spectrometry. Initial values of the Gibbs energy parameters via the CALPHAD (CALculation of PHAse Diagrams) method have been developed for the ternary phases observed upon U3Si2–FeCrAl interactions.
1 January 2017 in Journal of Nuclear Materials
1 September 2014 in Journal of Nuclear Materials
1 August 2017 in Journal of Nuclear Materials