1 June 2007 in 2007 IEEE Power Engineering Society General Meeting
Increasing wind power penetration into power grids is desirable because of its environmental and other benefits. Unfortunately, wind farms could cause serious voltage stability problems due to their output variability and intermittency. It is important to minimize impacts on voltage stability. We propose to use energy storage systems (ESS) to control the intermittency of wind power. The proposed solution, developed and evaluated in connection with the grid voltage stability, comprises three steps: (i) Quantification of wind farm impacts on grid voltage stability, (ii) Determination of acceptable wind power penetration levels, and (iii) Using ESS to facilitate wind power integration. The ultimate goal is to increase wind power penetration while maintaining and/or improving grid voltage stability.
14 September 2024 in KSCE Journal of Civil Engineering
Recently, digital mines (DM) have plays an increasingly important role in ensuring the safety, effective management and operation of mining activities. One of essential pillars for digital transformation in mining is Building Information Model (BIM), which is also one of the first steps to implement Digital Twin. Additionally, using BIM integrated with Terrestrial Laser Scanning (TLS) and adopting digital technology can provide powerful assistance in life cycle of mining. In this study, integrating BIM and TLS point clouds, which is the basic framework of DM, was applied to build 3D mining information model as well as assessing safety of Nui Beo underground coal mining in Vietnam. Industry Foundation Classes (IFC) standard is used to define the mining information model based on TLS point clouds providing geometric and attributive information of the structures. The 3D model was built for important structures of the mine, including the mine shaft, and tunnels based on TLS point cloud. Additionally, the safety assessment of rail tracks in the mine shaft was performed by comparing the TLS point cloud of rail tracks and their as-designed BIM models. The results showed that the integration of BIM and TLS is a practical solution for the information management and safety assessment of underground coal mines.
20 June 2022 in Geodesy and Cartography
The purpose of this study is to determine marine gravity anomalies with high accuracy using the CryoSat-2 satellite altimetry data in the Middle Vietnamese Sea and the adjacent territory. For this, the mentioned data and the process of determining gravity anomalies from the CryoSat-2 data were analyzed. The record from 818 GNSS-leveling points in Vietnam were used to evaluate and select the best global gravity field model for use in the calculation process. The findings from 31 gauge tidal were also used to assess and select the best mean dynamic topography model for the study area. Marine gravity anomalies in the study area were calculated using data from the CryoSat-2 satellite altimeter at 72 483 measurement points. The calculated results are compared with the ship-derived gravity anomalies at 1025 measurement points for assessment. The research results show that of the Earth Geopotential Model EIGEN6C4 and the Mean Dynamic Topography Model DTU15MDT are the most suitable for the research area. The accuracy of satellite-derived gravity anomalies, calculated from the CryoSat-2 satellite altimetry data in the study area, reaches ±1,18 mGal. Compared to the available results in the study area, this accuracy is the highest.
30 June 2024 in Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu
Purpose. The research aims to address the challenges posed by the integration of diverse methods, focusing on data collection techniques and level of detail (LoD) considerations, which facilitates the creation of detailed 3D models. The CityGML standard is employed for its ability to represent complex urban features, adapted here for mining environments. Methodology. Combining Unmanned Aerial Vehicle (UAV) and Terrestrial Laser Scanning (TLS) technologies to collect data for open-pit and underground coal mines. These data are processed to generate point clouds, which are then used to create 3D models of mining structures using Sketchup and REVIT. Finally, these models are converted into the CityGML standard using FME SAFE software. Findings. Through the use of Unmanned Aerial Vehicle and Terrestrial Laser Scanning technologies, precise point cloud data for open-pit and underground structures are acquired. CityGML serves as a suitable framework for digital mine representation, offering standardized data organization and exchange. The proposed methodology optimizes data collection and processing procedures, ensuring accuracy and efficiency in model creation. Notably, the study introduces a nuanced approach to LoD selection, considering the complexity and specific requirements of different mining structures. Originality. The article innovatively combines UAV and TLS technologies with the CityGML standard to create comprehensive 3D GIS models for coal mines operating with both open-pit and underground methods, addressing the unique challenges of modeling diverse mining structures and terrain features. Practical value. The practical value of the article lies in its provision of a systematic approach using UAV and TLS technologies, coupled with the CityGML standard, to create accurate 3D GIS models for coal mines employing both open-pit and underground methods. This methodology enhances mine management efficiency, resource estimation accuracy, and safety assessment capabilities.