1 July 2021 in Computerized Medical Imaging and Graphics
1 November 2017 in ISA Transactions
4 December 2017 in IEEE Journal of Oceanic Engineering
To inspect subsea cables, an autonomous underwater vehicle (AUV) with two triaxial magnetometers is usually assigned to track the cable route. In this paper, a novel two-layer framework synthesizing antinoise cable localization and robust tracking algorithm is proposed to guide an AUV to track subsea cables in the presence of sensor noise and ocean currents. First, an analytic formulation for the cable localization using two magnetometers is derived, and then a dedicated magnetic line-of-sight (LOS) guidance is built based on the horizontal offset between the AUV and the cable. Second, a novel antinoise method by estimating the horizontal offset is integrated into the LOS guidance law to reduce the negative effects of magnetic noise in the kinematic layer. Subsequently, in the dynamic layer, a simplified yet robust feedback controller with reduced implementation complexity is designed to track the desired guidance profiles, such that the AUV is able to track subsea cables in the presence of sensor noise and ocean currents. In addition, the capability of dynamic control laws accounting for ocean currents is analyzed in the amplitude–frequency domain. Finally, numerical studies illustrate the antinoise and robust performance of the proposed two-layer framework for subsea cable tracking.
30 May 2017 in Frontiers in Neuroscience
In this paper, we present a simultaneous and continuous kinematics estimation method for multiple DoFs across shoulder and elbow joint. Although simultaneous and continuous kinematics estimation from surface electromyography (EMG) is a feasible way to achieve natural and intuitive human-machine interaction, few works investigated multi-DoF estimation across the significant joints of upper limb, shoulder and elbow joints. This paper evaluates the feasibility to estimate 4-DoF kinematics at shoulder and elbow during coordinated arm movements. Considering the potential application of this method in exoskeleton, prosthetics and other upper limb rehabilitation techniques, the estimation performance is presented with different muscle activity decomposition and learning strategies. Principle component analysis (PCA) and independent component analysis (ICA) are respectively employed for EMG mode decomposition with artificial neural network (ANN) for electromechanical association learning. Four joint angles across shoulder and elbow are estimated from EMG simultaneously and continuously. With 70-s inter-cross validation and 2-min intra-cross validation, the feasibility, effectiveness and robustness of the proposed myoelectric decoding are presented.
11 June 2018 in International Journal of Intelligent Robotics and Applications
Human–machine interfaces (HMIs) are widely studied to understand the human biomechanics and/or physiology and the interaction between humans and machines/robots. The conventional rigid or invasive HMIs that record/send information from/to human bodies have significant disadvantages in practice for long-term, portable, and comfortable usages. To better adapt to natural soft skins, soft HMIs have been designed to deform into arbitrary shapes, and their bendable, stretchable, compressible and twistable properties offer a huge potential in future personalized applications. This paper presents a survey on various soft HMIs in terms of design, sensing, stimulation as well as their applications. Specifically, tactile/motion/bio-potential sensors are categorized for recording various data from human bodies, while stimulators are discussed for information feedback and motion activation to human bodies. It is anticipated that soft HMIs will promote the interaction among humans, machines/robots and environment to achieve desired coexisting-cooperative-cognitive function in a robot system, named as Tri-Co Robot, for the human-centered applications, such as rehabilitation, medical monitoring and human–robot cooperation.